TL-SG108E V2 loosing VLAN configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG108E V2 loosing VLAN configuration
Model :
Hardware Version :
Firmware Version :
ISP :
Hello,
i'm using the switch for a while now, bought it in february 2017.
I need the vlan for a sat-2-ip box that is broadcasting all the time and otherwise killing my wireless.
I had a 5 Port Netgear Switch for years, but i needed more ports so i changed to the TP-Link.
The thing is, from time to time it looses the configuration. Not everything, but 802.1Q VLAN PVID Setting and/or 802.1Q VLAN Configuration
You can tell, because the wireless is useless, connected but no throughput. I went mad finding the issue the first time, only realising when the TV was not working.
I can save the config, reboot / unpower, works properly. The switch is on 24/7, but even if it's powerless for a time, the config is saved.
Anyone ever had such an issue? Or is my switch simply damaged.
Kind regards and merry christmas
Odin4242
Hardware Version :
Firmware Version :
ISP :
Hello,
i'm using the switch for a while now, bought it in february 2017.
I need the vlan for a sat-2-ip box that is broadcasting all the time and otherwise killing my wireless.
I had a 5 Port Netgear Switch for years, but i needed more ports so i changed to the TP-Link.
The thing is, from time to time it looses the configuration. Not everything, but 802.1Q VLAN PVID Setting and/or 802.1Q VLAN Configuration
You can tell, because the wireless is useless, connected but no throughput. I went mad finding the issue the first time, only realising when the TV was not working.
I can save the config, reboot / unpower, works properly. The switch is on 24/7, but even if it's powerless for a time, the config is saved.
Anyone ever had such an issue? Or is my switch simply damaged.
Kind regards and merry christmas
Odin4242
Re:TL-SG108E V2 loosing VLAN configuration
Me again.
The Beta Firmware didn't change anything. And even the new 1.0.0 Build 20171214 Rel.70905 does not work properly.
My settings are:
From time to time, when the SAT-2-IP Box stops working, i simply have to change the Memership of VLAN 2 Port 7 beeing Tagged to Untagged or the other way round, click the "Add/Modify" Button and we're good to go for another day/week/month or so.
Than i'll change the setting back and click the "Add/Modify" Button again.
This is ridiculous, thing is, it starts annoying the rest of the family, because television stops working.
Save settings or reboot is not required to get the VLan back to work.
Anyone with a clever solution to that? Otherwise, i'll replace the switch with a different brand, Zyxel or DLink.
Thanks and Happy Easter
Odin4242
The Beta Firmware didn't change anything. And even the new 1.0.0 Build 20171214 Rel.70905 does not work properly.
My settings are:
From time to time, when the SAT-2-IP Box stops working, i simply have to change the Memership of VLAN 2 Port 7 beeing Tagged to Untagged or the other way round, click the "Add/Modify" Button and we're good to go for another day/week/month or so.
Than i'll change the setting back and click the "Add/Modify" Button again.
This is ridiculous, thing is, it starts annoying the rest of the family, because television stops working.
Save settings or reboot is not required to get the VLan back to work.
Anyone with a clever solution to that? Otherwise, i'll replace the switch with a different brand, Zyxel or DLink.
Thanks and Happy Easter
Odin4242
