Tp-1500g-10mbs + cap1750 + ac500 dhcp
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tp-1500g-10mbs + cap1750 + ac500 dhcp
Model :
Hardware Version :
Firmware Version :
ISP :
Hello,
I've a small office network with an AC500 controller, a TP-1500G-10MBPS PoE switch and two CAP1750; there are two SSID ("guests" and "company") on two VLAN.
I see that quite often the client of the "guests" SSID receive DHCP address from the "company" network instead of the guest one.
On AC500 there are two DHCP servers, one per VLAN, with different networks. If I connect the two CAP1750 directly to AC500 they work okay; if they're connected to the TP-1500G-10MBPS it seems the VLAN aren't discriminated anymore, as if the APs would receive DHCP only from VLAN1.
Any thoughts?
Thanks
Luca
Hardware Version :
Firmware Version :
ISP :
Hello,
I've a small office network with an AC500 controller, a TP-1500G-10MBPS PoE switch and two CAP1750; there are two SSID ("guests" and "company") on two VLAN.
I see that quite often the client of the "guests" SSID receive DHCP address from the "company" network instead of the guest one.
On AC500 there are two DHCP servers, one per VLAN, with different networks. If I connect the two CAP1750 directly to AC500 they work okay; if they're connected to the TP-1500G-10MBPS it seems the VLAN aren't discriminated anymore, as if the APs would receive DHCP only from VLAN1.
Any thoughts?
Thanks
Luca
