Create a pptp VPN from client windows to TL-R600VPN v3
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Create a pptp VPN from client windows to TL-R600VPN v3
Model :
Hardware Version :
Firmware Version :
ISP :
Good day, I need to create a vpn between my office and my windows10 pc.
In the office I connected the TL-R600VPN after the router of my provider, on the router I created a dmz to the TL-R600VPN.
in account setting I cretion the user with password, setting the status to enabled.
on the client I created the VPN by putting the public ADSL address of the office.
by connecting I see that it verifies the username and password, then after a few seconds returns the following error:
you should be able to establish a connection with the remote computer. The port used for the connection has been closed.
this is the log I find on the tplink:
[SUB][SUP]
[/SUP][/SUB]what am I doing wrong?
Hardware Version :
Firmware Version :
ISP :
Good day, I need to create a vpn between my office and my windows10 pc.
In the office I connected the TL-R600VPN after the router of my provider, on the router I created a dmz to the TL-R600VPN.
in account setting I cretion the user with password, setting the status to enabled.
on the client I created the VPN by putting the public ADSL address of the office.
by connecting I see that it verifies the username and password, then after a few seconds returns the following error:
you should be able to establish a connection with the remote computer. The port used for the connection has been closed.
this is the log I find on the tplink:
| Index | Time | Type | Level | Log Content |
| 16 | Nov 18 12:30:47 | VPN | INFO | PPTPS CTRL: Client pppd finish wait |
| 15 | Nov 18 12:30:47 | VPN | INFO | PPTPS CTRL: Client pppd TERM sending |
| 14 | Nov 18 12:30:47 | VPN | INFO | PPTPS CTRL: Client 151.33.188.107 control connection finished |
| 13 | Nov 18 12:30:44 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 12 | Nov 18 12:30:41 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 11 | Nov 18 12:30:38 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 10 | Nov 18 12:30:35 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 9 | Nov 18 12:30:32 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 8 | Nov 18 12:30:29 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 7 | Nov 18 12:30:26 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 6 | Nov 18 12:30:23 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 5 | Nov 18 12:30:20 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 4 | Nov 18 12:30:17 | PPP | INFO | sent [LCP Req asyncmap=0x0 auth=chap-MS-v2 magic=0x9920174d pcomp accomp] |
| 3 | Nov 18 12:30:17 | VPN | INFO | PPTPS CTRL: Starting call (launching pppd, opening GRE) |
| 2 | Nov 18 12:30:17 | VPN | INFO | PPTPS CTRL: Client 151.33.188.107 control connection started |
[SUB][SUP]
[/SUP][/SUB]what am I doing wrong?
