Home

Forums

Stories

Knowledge Base

Business Community > Pharos Wireless Bridges > CPE510 to IP camera connection problem

< Pharos Wireless Bridges

CPE510 to IP camera connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE510 to IP camera connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Zoidberg

2017-08-19 22:47:55

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2017-08-19

CPE510 to IP camera connection problem

2017-08-19 22:47:55

Model :

Hardware Version :

Firmware Version :

ISP :

Hi, im having a problem to connet my IP camera with 2 CPE510 and i dont know whats the problem.

Current setup:
IP Camera 192.168.0.101 > CPE510 Client 192.168.0.106 --------- CPE 510 AP 192.168.0.107 > Computer
when im running with cable from AP i cant connect to client or IP Camera but when i connect with wifi to the AP i get access to them both. no faulty cables

I have also tried following setup without any progress
IP Camera 192.168.0.101> Client 192.168.0.106 ------- AP 192.168.0.107 > Router 192.168.0.1 ( IP range 100-199) > NVR 192.168.0.108

3 Reply

Zoidberg

LV1

2017-08-20 04:01:59

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2017-08-19

CPE510 connection problem to IP Camera

2017-08-20 04:01:59

Model :

Hardware Version :

Firmware Version :

ISP :

Hi, i have problem to connect my IP camera using 2 CPE 510's and i dont know whats the problem. I have tested to place the AP and client 30m away and with line of sight. I have been trying different solution whitout no sucess. All IP adress set to static.
.
I have tried following setup

IP Cam 192.168.0.101 > Client 192.168.0.106 > -------- < AP 192.168.0.107 < Computer

I have also tried to connect it to the NVR

IP Cam 192.168.0.101 > Client 192.168.0.106 > ------- < AP 192.168.0.107 < Router 192.168.0.1 (IP range 100-199) < NVR 192.168.0.108

winstar

LV2

2017-09-01 11:20:48

Posts: 96

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2015-08-31

Re:CPE510 to IP camera connection problem

2017-09-01 11:20:48

Is your computer connected to the LAN1 of CPE510 or the second LAN port of PoE adapter? Besides, make sure your CPE510 is working on AP mode, other than AP router mode.
If so, your computer should be able to access the client and IP camera theoretically, if still not available, please try to ping the AP from your computer , see whether it's access able or not at first.

Josy

LV1

2019-07-13 18:07:06

Posts: 8

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2019-07-09

Re:CPE510 connection problem to IP Camera

2019-07-13 18:07:06

Zoidberg wrote

Model :

Hardware Version :

Firmware Version :

ISP :

Hi, i have problem to connect my IP camera using 2 CPE 510's and i dont know whats the problem. I have tested to place the AP and client 30m away and with line of sight. I have been trying different solution whitout no sucess. All IP adress set to static.
.
I have tried following setup

IP Cam 192.168.0.101 > Client 192.168.0.106 > -------- < AP 192.168.0.107 < Computer

I have also tried to connect it to the NVR

IP Cam 192.168.0.101 > Client 192.168.0.106 > ------- < AP 192.168.0.107 < Router 192.168.0.1 (IP range 100-199) < NVR 192.168.0.108

Hi, i know this thread is quite old but i am having the same problem using the cpe210. Were u able to finally figure it out?

Best Regards

CPE510 to IP camera connection problem

CPE510 to IP camera connection problem

Information

Voters 0

Tags