<
Switches
TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
2017-07-27 05:46:07
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-07-27 05:46:07
Tags:
Model :
Hardware Version :
Firmware Version :
ISP :
Dear forum readers / writers,
I'm currently struggling with a strange error message popping up when trying to set up 802.11q VLAN: "Amount of VLAN is full" The error message occurs when trying to simply configure a VLAN using VLAN-ID 100, one tagged and two untagged ports. Some tests have shown that the error message neither depends on amount of ports in VLAN nor VLAN-ID or VLAN name.
Just to provide you with an overview of what I'm trying to achieve:
Used enviroment
Switch TL-SG1016PE
AP EAP245
Router FritzBox 7590 (doesn't support VLAN)
Goal
AP provides "main WLAN" without VLAN-ID
[*]AP provides "guest WLAN" with VLAN-ID 100
[*]AP connects to switch's port 5
[*]Switch provides guest WLAN untagged to port 11 (guest WLAN uplink to FritzBox)
[*]Switch provides main WLAN to port 10 (all other traffic uplink to FritzBox)
Did anybody already faced that message? And if so: What am I doing wrong?
Thanks in advance and best regards,
Stephan
Hardware Version :
Firmware Version :
ISP :
Dear forum readers / writers,
I'm currently struggling with a strange error message popping up when trying to set up 802.11q VLAN: "Amount of VLAN is full" The error message occurs when trying to simply configure a VLAN using VLAN-ID 100, one tagged and two untagged ports. Some tests have shown that the error message neither depends on amount of ports in VLAN nor VLAN-ID or VLAN name.
Just to provide you with an overview of what I'm trying to achieve:
Used enviroment
Switch TL-SG1016PE
AP EAP245
Router FritzBox 7590 (doesn't support VLAN)
Goal
AP provides "main WLAN" without VLAN-ID
[*]AP provides "guest WLAN" with VLAN-ID 100
[*]AP connects to switch's port 5
[*]Switch provides guest WLAN untagged to port 11 (guest WLAN uplink to FritzBox)
[*]Switch provides main WLAN to port 10 (all other traffic uplink to FritzBox)
Did anybody already faced that message? And if so: What am I doing wrong?
Thanks in advance and best regards,
Stephan
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
15 Reply
Posts: 32
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2016-08-24
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-09-01 15:29:13
Georg wrote
Hi, Hibixa -
I tried resetting and new configuration a few times in the past, with not effect.
I have re-installed the installed firmware (170530), powered the switch off and on, did a reset and - much to my surprise - I was able to define my VLAN settings.
Thanks for your feedback which gave me the drive to try it again.
That's great! ;) Glad to hear that.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#12
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2018-03-21
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2018-03-21 17:53:08
I'm sorry, I'm new and I got too much of a place.
Someone could delete this text.
Thank you
Someone could delete this text.
Thank you
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#13
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2018-03-21
TP-Link TL-SG1016PE Switch PoE
2018-03-21 17:54:22
I'm sorry, I'm new and I got too much of a place.
Someone could delete this text.
Thank you
Someone could delete this text.
Thank you
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#14
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 747
Helpful: 115
Solutions: 18
Stories: 0
Registered: 2018-07-19
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2018-05-25 11:41:12
In the previous post, someone says that resetting the switch can solve the problem, maybe you can try.SupportHelp wrote
I have the same problem.When I enter a VLAN I got the message: The amount of VLAN is full: The firmware of TL-SG1016DE 3.0 is 1.0.1 Build 20170530Any Idea!Thankshttp://supporthelp.com/quicken-support/
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#16
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-30
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2018-05-26 00:19:10
For me, it took three or four reset before I could setup my VLANs. Reset does the trick, but it needs patience.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#17
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
2017-07-27 05:46:07
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
Information
Helpful: 0
Views: 3914
Replies: 15
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message