CPE210 impossible to connect too
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.CPE210 impossible to connect too
Posts: 20
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2017-07-10
2017-07-10 03:52:57
Posts: 20
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2017-07-10
CPE210 impossible to connect too
2017-07-10 03:52:57
Tags:
Model : CPE210
Hardware Version : Not Clear
Firmware Version : v1.3.3
ISP : virgin
Hi all. I just bought a CPE210 from amazon and i can't get it to work in AP mode. I want to extend the wifi from my house into the garden. I've been online all day with the support people trying everything to get this thing to connect but i think it's faulty.
i have tried connecting to it with 3 tablets and 2 phones, all I get is authentication errors. None of them can connect although they can all see the CPE210 and the signal strength is good. I've even removed the password in Pharos and I still can't connect.
Should this thing work straight out of the box? I followed the little booklet to the letter and I've tried different Ethernet cables, different ports on my super hub3, nothing works. I've reset it and tried at least 5 times, still no connection. I'm desperate, any ideas what to try next?
Hardware Version : Not Clear
Firmware Version : v1.3.3
ISP : virgin
Hi all. I just bought a CPE210 from amazon and i can't get it to work in AP mode. I want to extend the wifi from my house into the garden. I've been online all day with the support people trying everything to get this thing to connect but i think it's faulty.
i have tried connecting to it with 3 tablets and 2 phones, all I get is authentication errors. None of them can connect although they can all see the CPE210 and the signal strength is good. I've even removed the password in Pharos and I still can't connect.
Should this thing work straight out of the box? I followed the little booklet to the letter and I've tried different Ethernet cables, different ports on my super hub3, nothing works. I've reset it and tried at least 5 times, still no connection. I'm desperate, any ideas what to try next?
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
25 Reply
Posts: 4334
Helpful: 1044
Solutions: 173
Stories: 3
Registered: 2015-12-05
Re:CPE210 impossible to connect too
2017-07-13 02:33:24
13 EAP110-Outdoor in stock at Amazon UK, see:
https://www.amazon.co.uk/TP-Link-EAP110-Outdoor-300MBit-Outdoor-Accesspoint/dp/B01MT4T8TN
You can use any free IP in your router's subnetwork for the CPE.
You can use any free IP in your router's subnetwork for the CPE.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#22
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 20
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2017-07-10
Re:CPE210 impossible to connect too
2017-07-13 18:12:33
Carry out master rest on CPE.
Connect via Ethernet to computer.
Open network and sharing centre-click on Ethernet-properties-IP4v-use following address-192.168.0.99 subnet mask 255.255.255.0
Click ok-ok-close.
Switch off wifi on computer and open a browser.
Type http://192.168.0.254
Username admin. Password admin. Agree to terms.
Change password for security. At this point I am in Pharos UI and 6 led’s are on the CPE210, 4 wifi signal, lan0 and power.
Quick set up-Access point-click next-Lan settings-ip address 192.168.0.254 (should I change this to 192.168.0.99?) subnet mask 255.255.255.0
Click next – Wireless AP settings-security, none, maxstream enabled, distance 10km, channel frequency-auto, channel width 20/40mhz, mode 802.11 b/g/n, SSID (unchanged Tp link outdoor).
Click next, click finished.
Re-log in with admin and new password.
Status tab - on the right hand side it says “wireless settings” under distance it said 0, I changed this to 10.
Under “radio status” it says “connected stations 0”.
Network TAB - connection type-static. IP address 192.168.0.254 (should I change this?) subnet mask 255.255.255.0, Gateway IP 0.0.0.0, IGMP proxy unchecked, DHCP server unchecked.
Wireless tab- nothing changed.
Management page – Nothing changed.
System tab – nothing changed.
Log out.
Disconnect Ethernet cable from computer.
Reset computer IP. Turn computer wifi back on.
Relocate CPE, unplug and move next to router. Power up and connect Ethernet to router.
I’ve connected to the CPE210 in my house when it’s very close to the router. Now I am going to relocate it outside via a cat 5e Ethernet cable.
Connect via Ethernet to computer.
Open network and sharing centre-click on Ethernet-properties-IP4v-use following address-192.168.0.99 subnet mask 255.255.255.0
Click ok-ok-close.
Switch off wifi on computer and open a browser.
Type http://192.168.0.254
Username admin. Password admin. Agree to terms.
Change password for security. At this point I am in Pharos UI and 6 led’s are on the CPE210, 4 wifi signal, lan0 and power.
Quick set up-Access point-click next-Lan settings-ip address 192.168.0.254 (should I change this to 192.168.0.99?) subnet mask 255.255.255.0
Click next – Wireless AP settings-security, none, maxstream enabled, distance 10km, channel frequency-auto, channel width 20/40mhz, mode 802.11 b/g/n, SSID (unchanged Tp link outdoor).
Click next, click finished.
Re-log in with admin and new password.
Status tab - on the right hand side it says “wireless settings” under distance it said 0, I changed this to 10.
Under “radio status” it says “connected stations 0”.
Network TAB - connection type-static. IP address 192.168.0.254 (should I change this?) subnet mask 255.255.255.0, Gateway IP 0.0.0.0, IGMP proxy unchecked, DHCP server unchecked.
Wireless tab- nothing changed.
Management page – Nothing changed.
System tab – nothing changed.
Log out.
Disconnect Ethernet cable from computer.
Reset computer IP. Turn computer wifi back on.
Relocate CPE, unplug and move next to router. Power up and connect Ethernet to router.
I’ve connected to the CPE210 in my house when it’s very close to the router. Now I am going to relocate it outside via a cat 5e Ethernet cable.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#23
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4334
Helpful: 1044
Solutions: 173
Stories: 3
Registered: 2015-12-05
Re:CPE210 impossible to connect too
2017-07-13 21:16:43
dougie wrote
Quick set up-Access point-click next-Lan settings-ip address 192.168.0.254 (should I change this to 192.168.0.99?) subnet mask 255.255.255.0
No, the .99 is your PC, .254 is the CPE. You can change the IP of the CPE to some free IP of your home network. E.g. if your router uses 192.168.1.45 and serves DHCP from 192.168.1.46 to 192.168.1.254, then 192.168.1.1 to 192.168.1.44 are free IPs (if no other device uses them) and you can pick one IP for the CPE so that you could manage it from your home network.
But please, you need to get some basic knowledge of IP addressing and setup of a network with static IPs or to get the help of someone who can show you how to find out actual settings at your main router. It's hardly possible to give advice on this issue without exact knowledge of the network topology set up at your side.
Click next – Wireless AP settings-security, none, maxstream enabled, distance 10km, channel frequency-auto, channel width 20/40mhz, mode 802.11 b/g/n, SSID (unchanged Tp link outdoor).
Do not enable MAXtream unless you plan to only connect to another CPE. It is not standard WiFi and therefore useless for normal clients. You won't be able to connect smart phones/tablets if MAXtream is enabled!
Also, set distance to " Auto", not to 10km (except your garden is 10km in range, but then all bets are off for smart phones/tablets anyway).
As for WiFi settings, set fixed channel width 20 MHz. 20 Mhz uses 4 channels simultaneously, 40 MHz uses 8 channels. You hardly will find a place in urban environments, where all 8 channels are available just for your CPE. Even 4 channels will need to be shared with foreign devices such as your neighbor's WiFi, so the CPE gets only a fraction of time to get hold on the channels for sending data.
Status tab - on the right hand side it says “wireless settings” under distance it said 0, I changed this to 10.
Status shows you actual values, while settings instruct the CPE what to use if a client connects. With 10km setting you will run into trouble. Set it to " Auto".
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#24
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 20
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2017-07-10
Re:CPE210 impossible to connect too
2017-07-16 03:25:59
Why have two posts been removed?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#25
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4334
Helpful: 1044
Solutions: 173
Stories: 3
Registered: 2015-12-05
Re:CPE210 impossible to connect too
2017-07-16 04:39:32
dougie wrote
Why have two posts been removed?
The posts have not been removed, but you did post them in the wrong thread. They are still there:
http://forum.tp-link.com/showthread.php?98914-CPE210-point-to-point-set-up-question&p=209328&viewfull=1#post209328
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#26
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 20
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2017-07-10
2017-07-10 03:52:57
Posts: 20
Helpful: 2
Solutions: 0
Stories: 0
Registered: 2017-07-10
Information
Helpful: 0
Views: 15856
Replies: 25
Voters 0
No one has voted for it yet.
Tags
Related Articles
CPE210 can´t connect at all
4456
0
Can't connect CPE210
905
0
Connect CPE210 with CPE220
2135
0
Report Inappropriate Content
Transfer Module
New message