Can't change IP address of TL-SG2424
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't change IP address of TL-SG2424
Model :
Hardware Version :
Firmware Version :
ISP :
I have a number of devices connected to my TL-SG2424 smart switch, which in turn is connected to my router. Devices connected directly to the router can obtain an ip address and access the internet. Devcies connected to the switch cannot. My subnet is 192.168.2.X. I have changed my laptop network connection to the subnet 192.168.0.X and accessed the user interface of the switch (default ip address is 192.168.0.1). I tried set the switch to use DHCP to get its ip address. However, it does not obtain a lease from the router. I have also tried to set a static ip address in the 192.168.2.x subnet. This also failed in that I could not detect the static ip address for the switch. In both cases I could not return to the admin interface in the 192.168.0.x subne and had to perform a hard reset. Could you please advise any troubleshooting steps I should take? Thanks
Hardware Version :
Firmware Version :
ISP :
I have a number of devices connected to my TL-SG2424 smart switch, which in turn is connected to my router. Devices connected directly to the router can obtain an ip address and access the internet. Devcies connected to the switch cannot. My subnet is 192.168.2.X. I have changed my laptop network connection to the subnet 192.168.0.X and accessed the user interface of the switch (default ip address is 192.168.0.1). I tried set the switch to use DHCP to get its ip address. However, it does not obtain a lease from the router. I have also tried to set a static ip address in the 192.168.2.x subnet. This also failed in that I could not detect the static ip address for the switch. In both cases I could not return to the admin interface in the 192.168.0.x subne and had to perform a hard reset. Could you please advise any troubleshooting steps I should take? Thanks
