Home

Forums

Stories

Knowledge Base

Business Community > Pharos Wireless Bridges > CPE 210 does not connect in SISO AP. Any type of AP of any brand.

< Pharos Wireless Bridges

CPE 210 does not connect in SISO AP. Any type of AP of any brand.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE 210 does not connect in SISO AP. Any type of AP of any brand.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

sphreak

2017-02-04 06:20:57

Posts: 11

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2016-12-19

CPE 210 does not connect in SISO AP. Any type of AP of any brand.

2017-02-04 06:20:57

Model :

Hardware Version :

Firmware Version :

ISP :

[COLOR=#212121]The device simply does not connect to any wireless network when in client mode or bridge mode. The connection is only possible in repeater mode or AP client router . I have about 30 stopped equipment due to this problem. Hardware CPE210 V1.1 Firmware Version: 1.3.3 Build 20151215 and 1.3.3 Build 20160705.

[FONT=arial]Another problem is that PharOS does not connect to the AP in N mode. It only connects in B or G mode. In N mode only between CPE210 and CPE210.

[/FONT]Screenshots:

In this screenshot, the equipment is in client mode.

In this screenshot, the equipment is in repeater (Range Extender) mode.

The Range Extender mode is the only one that connects to networks. Other modes simply do not connect. I am with 30 equipment stopped here due to this problem.

Thank's
The device simply does not connect to any wireless network when in client mode or bridge mode. The connection is only possible in repeater mode. I have about 30 stopped equipment due to this problem. Hardware CPE210 V1.1 Firmware Version: 1.3.3 Build 20151215 and 1.3.3 Build 20160705

Last edited by sphreak; 12-19-2016 at 13:03. Reason: Additional Information

Another problem is that it does not connect to AP other than PharOS in N mode. It only connects in B or G mode.

5 Reply

sphreak

LV1

2017-02-04 21:21:24

Posts: 11

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2016-12-19

Re:CPE 210 does not connect in SISO AP. Any type of AP of any brand.

2017-02-04 21:21:24

Johnsontp wrote

What value does TX configure in client mode? To connect to the AP, select, connect, then Lock to AP

Even locked MAC in AP survey, connection does not occur. I've tried several APs with different brands. In B, G or N modes separately. WEP, WPA, open ... simply nothing works if the AP is SISO ... In MIMO AP everything is ok.

sphreak

LV1

2017-02-05 07:23:26

Posts: 11

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2016-12-19

Re:CPE 210 does not connect in SISO AP. Any type of AP of any brand.

2017-02-05 07:23:26

Johnsontp wrote

All access points must have the firmware updated.

Please...

Last possible firmware has uploaded in all CPE210!!! All known options have been tried!

Access point also updated! Ubiquiti with priority!

sphreak

LV1

2017-02-05 09:12:36

Posts: 11

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2016-12-19

Re:CPE 210 does not connect in SISO AP. Any type of AP of any brand.

2017-02-05 09:12:36

Johnsontp wrote

I have my CPE210 V1.1 in client mode connected to a Mikrotik RB Metal 2SHPn and no problem in connection. Try updating Pharos 2.0 http://forum.tp-link.com/showthread.php?94812-Upgrading-all-my-Pharos-v1.x-network-to-2.0

No effect.... :(

sphreak

LV1

2017-02-05 09:28:45

Posts: 11

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2016-12-19

Re:CPE 210 does not connect in SISO AP. Any type of AP of any brand.

2017-02-05 09:28:45

Johnsontp wrote

I have my CPE210 V1.1 in client mode connected to a Mikrotik RB Metal 2SHPn and no problem in connection. Try updating Pharos 2.0 http://forum.tp-link.com/showthread.php?94812-Upgrading-all-my-Pharos-v1.x-network-to-2.0

Despite no effect. The only mode that had connection now changed to AP CLIENT ROUTER (WISP CLIENT) This CPE is a mess !!!

sphreak

LV1

2017-02-05 11:59:09

Posts: 11

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2016-12-19

Re:CPE 210 does not connect in SISO AP. Any type of AP of any brand.

2017-02-05 11:59:09

Johnsontp wrote

What are the brands and models of your AP SISO?

Basically Ubiquiti Bullet M2 with sector panel vertically polarized. But I did controlled tests with TP Link home routers, Cisco, D'Link and chinese others. If the router is SISO (150mbps max), connection not occurs. If router is MIMO (300mbps max) connection is OK.

I really need a bridge connection to pass valid IP to equipments after CPE

#10

CPE 210 does not connect in SISO AP. Any type of AP of any brand.

CPE 210 does not connect in SISO AP. Any type of AP of any brand.

Information

Voters 0

Tags