TL-SG108E Bandwidth Control

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG108E Bandwidth Control

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG108E Bandwidth Control
TL-SG108E Bandwidth Control
2017-01-21 00:03:21
Model :

Hardware Version :

Firmware Version :

ISP :

Hi, I would like to use 4 port with bandwidth control. I have port 2, 3, 4 and 5 set to Ingress Rate 2048 and Egress Rate 10240.
But when I start a Speed test, only the Download Rate is limited. The Upload is completely unrestricted.
Do I have to adjust something else?

Best Regards

Sascha
  0      
  0      
#1
Options
2 Reply
Re:TL-SG108E Bandwidth Control
2017-01-22 14:13:34
You could contact the TP-Link support for help first i think. But i need to mention that there is less people make bandwidth control in easy smart switch, it is strange also.
  0  
  0  
#2
Options
Re:TL-SG108E Bandwidth Control
2017-01-22 22:15:15

sascha_focus wrote


But when I start a Speed test, only the Download Rate is limited. The Upload is completely unrestricted.


Works for me (tested with TL-SG108E and TL-SG108PE @latest firmware using iperf):

Ingress bandwidth 2048 Kbps, egress 10240 Kbps:




Ingress bandwidth 10240 Kbps, egress 10240 Kbps:




Unlimited bandwidth:




Initial spikes probably come from buffering.

Which speed test did you use?
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  3  
  3  
#3
Options