Business Community > Pharos Wireless Bridges > WA5210G as repeater
< Pharos Wireless Bridges

WA5210G as repeater

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WA5210G as repeater

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WA5210G as repeater
WA5210G as repeater
2017-01-07 21:13:43
Model :

Hardware Version :

Firmware Version :

ISP :

ROUTER MODEL TPLINK WR1043ND V2
With Firmware DD-WRT v3.0-r30731 std

REPEATER MODEL TL-WA5210G V.1

Internet <> TL-WR1043ND <><><>30m<><><> TL-WA5210G <> WI-FI

I need another wi-fi network (with a different SSID) in another building, 30m far from the main router.

The WA5210G, configured as repeater, works properly without security.
But using WEP (WPA is not allowed in repeater mode) it does not work.
I tried ASCII and Hexadecimal passwords, 64 and 128 bits, with no success.

Any idea ? or any other solution ?
Thanks in advance !
  0      
 
  0      
 
#1
Options
6 Reply
Re:WA5210G as repeater
2017-01-08 06:45:32
1-flash 52 to Tp-Station UBNT (if you don't have the files, ask)
2-set 52 as Client and add a cheap router set as AP (52 is a bad Client)
3-If you have a DD-WRT 30 mts is a short distance, buy a cheap router like 741 and load DD-WRT set as Client + AP
4-set 52 as AP (works well) on the Internet side, point to building where you need the Internet, test Internet in building
If not enough add a cheap router like 740, flash DD-WRT and set as Client +AP
4 scenarios to chose
If you have DD-WRT questions, ask them in their forum
  0  
  0  
#2
Options
Re:WA5210G as repeater
2017-01-08 14:38:05

danymarc wrote

1-flash 52 to Tp-Station UBNT (if you don't have the files, ask)


Thanks!
I would prefer the 1st solution (does need HW changes!), but I a not familliar with UBNT and from a quick search I understood it does not support the repeater mode.
Is it correct or i got a wrong information?
  0  
  0  
#3
Options
Re:WA5210G as repeater
2017-01-09 02:26:06

Acuadulza wrote

Thanks!
I would prefer the 1st solution (does need HW changes!), but I a not familliar with UBNT and from a quick search I understood it does not support the repeater mode.
Is it correct or i got a wrong information?

You are wrong
  0  
  0  
#4
Options
Re:WA5210G as repeater
2017-01-09 04:07:04

danymarc wrote

You are wrong


May be I looked for a wrong software, could you please advise the correct version? Thanks for your support!
  0  
  0  
#5
Options
Re:WA5210G as repeater
2017-01-09 04:39:36
Send me PM with your mail and WhatsApp
  0  
  0  
#6
Options
Re:WA5210G as repeater
2020-04-05 06:29:29
Please give me a file
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1847

Replies: 6

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.