Pharos Control can access dif. subnets
AP-Client Router uses a dif subnet on the AP side
As you don't provide info. of your IPs, Gateway & subnet
No more can be added

Hola y gracias por responder.


No he explicado correctamente.


Actualmente tengo acceso a Pharos de control Ok.


La red sería algo como esto:

WAN x.x.x.x<-->192.168.1.1/24 Router - LAN<-->(192.168.1.2/24 CPE210 ap mode)<--> ((192.168.1.3/24 CPE210 ap router client)Subnet 192.168.0.1/24)

This would be roughly part of my network settings now.


I'm in the 192.168.1.0/24 and as mentioned above, from Pharos Control can manage perfectly but not from the web interface.

A greeting

@danymarc answered correctly in the post #2 ... well .... I read it with Pharos Control can access any device from any network segment ...

danymarc wrote

Pharos Control can access dif. subnets
AP-Client Router uses a dif subnet on the AP side
As you don't provide info. of your IPs, Gateway & subnet
No more can be added

but to connect directly from the web interface is necessary to be in the same subnet of the Pharos devices ....

in this case 192.168.1.x