firewall blicks not working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
firewall blicks not working
Model :
Hardware Version :
Firmware Version :
ISP :
ok wan1 static Ip 192.168.1.55 255.255.255.0 gateway 192.168.1.254
wan2 static ip 192.168.3.55 255.255.255.0 gateway 192.168.3.254
firewall rule
Rules
well what I wanted to try was block port 80 to wan1 so that it only uses wan2 even if the wan2 is unplugged
any o e who wasn't to enjoy higher bandwidth in wan1 will get nasty and remove lan wire of wan 2 so that they shift over to wan1.
I want 80 port only to be used at wan2
Hardware Version :
Firmware Version :
ISP :
ok wan1 static Ip 192.168.1.55 255.255.255.0 gateway 192.168.1.254
wan2 static ip 192.168.3.55 255.255.255.0 gateway 192.168.3.254
firewall rule
Rules
| [/TD] [TD="width: 30"]No. |
Source | Destination | Policy | Service | Interface | Effective Time | Description | Action |
| [/TD] [TD="class: NORMAL, width: 30"]1 |
192.168.0.0/24 | 192.168.1.0/24 | Block | HTTP | LAN | Always | --- |
well what I wanted to try was block port 80 to wan1 so that it only uses wan2 even if the wan2 is unplugged
any o e who wasn't to enjoy higher bandwidth in wan1 will get nasty and remove lan wire of wan 2 so that they shift over to wan1.
I want 80 port only to be used at wan2
