TL-SG108E (v2) question about (default) VLAN1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG108E (v2) question about (default) VLAN1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
25 Reply
Re:TL-SG108E (v2) question about (default) VLAN1
2017-11-15 03:06:25

TPTHZ wrote

I have sent the email to tp-link technical support team. They said they have feedback this demand to their RD engineer.
I do not know whether they will release the firmware, I will ask them some days later.
PS: Sometimes,I send email to tp-link global technical support team, not local technical support team.Their senior engineer may give accurate information.
But this one depends on luke also:p


All that can engineer do it post new firmware, where will be blocked store in configuration file information about VLAN1.
And in future trick with change configuration file will be disabled.
http://lexxai.pp.ua
  0  
  0  
#22
Options
Re:TL-SG108E (v2) question about (default) VLAN1
2017-11-15 04:15:51

lexxai wrote

All that can engineer do it post new firmware, where will be blocked store in configuration file information about VLAN1.
And in future trick with change configuration file will be disabled.


Oh, I don't think so. All the R&D needs is a little more pressure from the market. They are already losing customers to Netgear and Ubiquiti when it comes to small semi-managed switches because of the fixed Default_VLAN in TL-SG108E/PE. Changes are that TP-Link will probably re-consider this unlucky design decision, especially since it causes trouble even with TP-Link gear such as the EAPs.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#23
Options
Re:TL-SG108E (v2) question about (default) VLAN1
2017-11-17 04:57:15

tpham3783 wrote

see the URL below to disable vlan1. Instruction is one page 5.

https://forum.pfsense.org/index.php?topic=123324.60


Configuration file with changed one byte of configure file model TL-SG1016DE can't be flashed back. Check sum control may be.
Result of comparing : https://lexxai.blogspot.com/2017/11/tl-sg108e-default-vlan1.html
http://lexxai.pp.ua
  0  
  0  
#24
Options
Re:TL-SG108E (v2) question about (default) VLAN1
2017-11-17 10:22:42

R1D2 wrote

Oh, I don't think so. All the R&D needs is a little more pressure from the market. They are already losing customers to Netgear and Ubiquiti when it comes to small semi-managed switches because of the fixed Default_VLAN in TL-SG108E/PE. Changes are that TP-Link will probably re-consider this unlucky design decision, especially since it causes trouble even with TP-Link gear such as the EAPs.


Yes, I agree with you. Communication is important,If TP-LINK gets more feedback from different consumer, I think they will improve this switch(Besides the limitation in hardware).
  1  
  1  
#25
Options
Re:Re:TL-SG108E (v2) question about (default) VLAN1
2018-09-07 01:26:50 - last edited 2018-10-02 20:03:57

I try selcect for buy some of Managed Switches by TP-LINK : JetStream L2 Managed Swicth T2600G V3.

Can confirm that members of VLAN1 can be changed.

 

 

http://lexxai.pp.ua
  0  
  0  
#26
Options