SG108E Port Trunk specifications
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
SG108E Port Trunk specifications
Model :
Hardware Version :
Firmware Version :
ISP :
Is there any documentation on using the Port Trunking feature in the switch? Has anyone had success? Simple google searches and looking at the user manuals only provide a vague description of the feature but don't include any details for implementation.
I've tried using the bonding driver in Linux and have created an LACP bond (802.1ad). The interface will technically connect, however one of the two NICs will drop almost 100% of its packets, which both negates the benefit of LACP and creates massive network lag times.
Any information would be useful.
Hardware Version :
Firmware Version :
ISP :
Is there any documentation on using the Port Trunking feature in the switch? Has anyone had success? Simple google searches and looking at the user manuals only provide a vague description of the feature but don't include any details for implementation.
I've tried using the bonding driver in Linux and have created an LACP bond (802.1ad). The interface will technically connect, however one of the two NICs will drop almost 100% of its packets, which both negates the benefit of LACP and creates massive network lag times.
Any information would be useful.