Multi-SSID and IPv6
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multi-SSID and IPv6
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi,
I hope it's not a bug I found (so it can be fixed fast ;) )
Out Setup is:
VLAN 1:
VLAN 10:
VLAN 11:
Now I associated my SSIDs:
VLAN1: Intern WPA2-PSK
VLAN10: Staff WPA2-Enterprise
VLAN11: Guest None/Portal
VLAN1 is working fine - I get both IPv4 and IPv6.
VLAN10 and 11 are not working as intended:
I get my IPv4 Address but hosts also get a IPv6 Prefix from my Stateless RA on VLAN1.
After some troubleshooting I ended up with a SSID Blub associated with VLAN 23 (I have no VLAN 23 on my Switches):
I get no IPv4 (which is totally fine) but I get my IPv6 Prefix - which is is my current Problem :(
Any Hints or have I found a Bug?
BTW: Switches are Cisco SG200 and SG500
Greetings from Germany
the MiCrO
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi,
I hope it's not a bug I found (so it can be fixed fast ;) )
Out Setup is:
VLAN 1:
IPv4 192.168.5.0/24 GW: 192.168.5.4
IPv6 xxxx:yyyy:5617::/64 GW and Prefix announced with stateless RA
IPv6 xxxx:yyyy:5617::/64 GW and Prefix announced with stateless RA
VLAN 10:
IPv4: 192.168.0.0/28 GW: 192.168.0.1
no IPv6
no IPv6
VLAN 11:
IPv4: 192.168.0.64/28 GW: 192.168.0.65
Now I associated my SSIDs:
VLAN1: Intern WPA2-PSK
VLAN10: Staff WPA2-Enterprise
VLAN11: Guest None/Portal
VLAN1 is working fine - I get both IPv4 and IPv6.
VLAN10 and 11 are not working as intended:
I get my IPv4 Address but hosts also get a IPv6 Prefix from my Stateless RA on VLAN1.
After some troubleshooting I ended up with a SSID Blub associated with VLAN 23 (I have no VLAN 23 on my Switches):
I get no IPv4 (which is totally fine) but I get my IPv6 Prefix - which is is my current Problem :(
Any Hints or have I found a Bug?
BTW: Switches are Cisco SG200 and SG500
Greetings from Germany
the MiCrO