Business Community > Pharos Wireless Bridges > TL-WA7510N w/o router w/o internet
< Pharos Wireless Bridges

TL-WA7510N w/o router w/o internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA7510N w/o router w/o internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA7510N w/o router w/o internet
TL-WA7510N w/o router w/o internet
2016-03-01 18:45:02
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

I need to connect 2 TL-WA7510N, with a distance of 500m, but it won't use internet or router. Its used only to connect 2 LAN interface.

Wich configuration should i use, because I need 1 AP to at as a router for LAN and wifi.

Thanks in advance
  0      
 
  0      
 
#1
Options
8 Reply
Re:TL-WA7510N w/o router w/o internet
2016-03-02 21:12:06
1-AP mode
2-Client mode
  0  
  0  
#2
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-03 10:03:53
In that what you want is just to connect 2 LAN interface, why do you need 1 AP to be a router?
Actually one in AP mode and the other in Client mode is okay for your requirement.
  0  
  0  
#3
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-03 10:38:46
I see more, a misinterpretation from his side
  0  
  0  
#4
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-03 16:45:16
I don't have a router in that network(yes it's something a bit special and isolated) so I need that 1 of the AP work as DHCP server to give IP to the LAN interfaces.

I was thinking the same you tell me, but I'm not sure if working in AP mode the RJ45 interface is considered as WAN , in that case it won't give an IP to this interface.

It's a special video interface, so i can't configure an IP.
  0  
  0  
#5
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-03 18:22:10

Serpp wrote

I need that 1 of the AP work as DHCP server to give IP to the LAN interfaces.

set AP-Router and on the other side Client
  0  
  0  
#6
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-04 08:44:14

Serpp wrote

I don't have a router in that network(yes it's something a bit special and isolated) so I need that 1 of the AP work as DHCP server to give IP to the LAN interfaces.

I was thinking the same you tell me, but I'm not sure if working in AP mode the RJ45 interface is considered as WAN , in that case it won't give an IP to this interface.

It's a special video interface, so i can't configure an IP.

If just for DHCP issue you can enable DHCP Server on AP device.
And you are right that in AP Router mode the only RJ45 port plays the role of a WAN port.
  0  
  0  
#7
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-09 12:10:18
if another device give DHCP, connect one 7510 as AP, an other as client, but two with option WDS active...

this make the conection wifi are a cable invisible betwhen 7510... this is the way to joint two nets....

regards...
  0  
  0  
#8
Options
Re:TL-WA7510N w/o router w/o internet
2016-03-17 17:06:44
Thank you everybody for your answer, I'll manage to put a router adn do as victor says.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 1513

Replies: 8

Related Articles
 TL-SG1016DE, conflict w/ VDSL router
429 0
C440-w Poe help
465 0
Is VIGI C440-W waterproof or not?
594 0
 TL-WA7210N Access Point w/ TL-ANT2424B antenna
935 0
SG2210MP not powering EAP223 w/ POE
255 0
 DDNS, Internet IP (w/Cable Modem)
433 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.