WA7210N wifi signal bouncing
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WA7210N wifi signal bouncing
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi there!
I recemtly got me a WA7210N and really loved the signal strenght and configuration options. However today it started to act up:
With autochannel it provides a wifi signal
for 15 seconds,
then signal goes away for 5 seconds,
returns for another 15 seconds,
then goes away again for 5 seconds,
comes back for 15 secs
...
infinitely
With channel fixed to say channel 8
there is a singal for approximately 40seconds
and never ever reappears.
And of course the signal indicator lead are all lit permanently. Surveyed by cell-phone. Which show a permenent signal of my homes "Family" WLAN running on th trusy WR741ND.
The wifi networks (WR741ND,WA7210N) are to be unrelated, and not connected via LAN. Network config works flawlessly, reboot, and factory reset don't help.
Whats wrong? What should i do?
Background info WA7210N:
[CODE]Firmware Version: 3.19.0 Build 140730 Rel.58003n
Hardware Version: WA7210N v2 00000000
Wired
MAC Address: 60-E3-27-47-E6-FA
IP Address: 192.168.0.254
Subnet Mask: 255.255.255.0
Wireless
Operation Mode: Access Point
Name (SSID): drAP
Channel: 8
Mode: 11bgn mixed
Channel Width: 20MHz
MAC Address: 60-E3-27-47-E6-FA
[/CODE]
Hardware Version : Not Clear
Firmware Version :
ISP :
Hi there!
I recemtly got me a WA7210N and really loved the signal strenght and configuration options. However today it started to act up:
With autochannel it provides a wifi signal
for 15 seconds,
then signal goes away for 5 seconds,
returns for another 15 seconds,
then goes away again for 5 seconds,
comes back for 15 secs
...
infinitely
With channel fixed to say channel 8
there is a singal for approximately 40seconds
and never ever reappears.
And of course the signal indicator lead are all lit permanently. Surveyed by cell-phone. Which show a permenent signal of my homes "Family" WLAN running on th trusy WR741ND.
The wifi networks (WR741ND,WA7210N) are to be unrelated, and not connected via LAN. Network config works flawlessly, reboot, and factory reset don't help.
Whats wrong? What should i do?
Background info WA7210N:
[CODE]Firmware Version: 3.19.0 Build 140730 Rel.58003n
Hardware Version: WA7210N v2 00000000
Wired
MAC Address: 60-E3-27-47-E6-FA
IP Address: 192.168.0.254
Subnet Mask: 255.255.255.0
Wireless
Operation Mode: Access Point
Name (SSID): drAP
Channel: 8
Mode: 11bgn mixed
Channel Width: 20MHz
MAC Address: 60-E3-27-47-E6-FA
[/CODE]