TL-SG108E IP address (8-port GB "easysmart"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG108E IP address (8-port GB "easysmart"
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
I installed and everything seems to be working. However the config utility tells me the switch is at 192.168. 0.1 and must be configured from a device in the same IP subnet. Everything on my router, including the 3 devices attached to the switch, is 192.168. 1.n - it does not show an attached device at that IP. So how do I resolve?
Thanks,
Edit> Double-clicking the switch line gave me the error, but then realized that clicking the settings button let me log in and change the IP to a 192.168.1.n. So now my question is whether I should turn on DHCP, and whether I should set up a DHCP reservation for the switch?
Hardware Version : Not Clear
Firmware Version :
ISP :
I installed and everything seems to be working. However the config utility tells me the switch is at 192.168. 0.1 and must be configured from a device in the same IP subnet. Everything on my router, including the 3 devices attached to the switch, is 192.168. 1.n - it does not show an attached device at that IP. So how do I resolve?
Thanks,
Edit> Double-clicking the switch line gave me the error, but then realized that clicking the settings button let me log in and change the IP to a 192.168.1.n. So now my question is whether I should turn on DHCP, and whether I should set up a DHCP reservation for the switch?
