TL-R470T+ v4.0 How do I access LAN from WAN port Wi-Fi Router?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R470T+ v4.0 How do I access LAN from WAN port Wi-Fi Router?
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Please help, I cant seem to find an answer at all..
I have a TL-R470T+ v4.0 1.0.0 Build 20141208 Rel.36359s configured and working almost as desired with to WAN gateways (1 x ADSL & 1 x LTE)
LAN IP of TL-R470t+ (10.0.0.5)
WAN1 IP 10.0.1.10 with Gateways 10.0.1.1 Router plugged into this port is configured with IP 10.0.1.1
WAN2 IP 10.0.2.10 (Subnet 255.255.255.0) with Gateways 10.0.2.1 & Router plugged into this port is configured with IP 10.0.2.1
I can get access from my LAN to both these routers interfaces and internet works great.
Problem is this: Both 10.0.1.1 and 10.0.2.1 are also Wi-Fi Routers with DHCP disabled. I was simply expecting to somehow route back to my LAN while connected through Wi-Fi to one of these routers but it does not. While Connecting via wireless to 10.0.1.1 I cant access 10.0.2.1 even if i change the IP of the 10.0.2.1 to 10.0.1.2 (to same subnet). Although this may seem logical to you, to me its a mystery. So basically, I just want to use those 2 WAN routers as Wi-Fi routers too and be able to access my LAN. With DHCP disabled, I cant access anything. When I enable DHCP on lets say 10.0.1.1 with DHCP range 10.0.1.50 to 10.0.1.100 then I am able to get internet but no LAN access. And I am sure to the knowledgeable guy out there this also seems logical.
How do I make my Wi-Fi routers plugged into the WAN ports of TL-R470T+ still access the LAN?
Hardware Version : Not Clear
Firmware Version :
ISP :
Please help, I cant seem to find an answer at all..
I have a TL-R470T+ v4.0 1.0.0 Build 20141208 Rel.36359s configured and working almost as desired with to WAN gateways (1 x ADSL & 1 x LTE)
LAN IP of TL-R470t+ (10.0.0.5)
WAN1 IP 10.0.1.10 with Gateways 10.0.1.1 Router plugged into this port is configured with IP 10.0.1.1
WAN2 IP 10.0.2.10 (Subnet 255.255.255.0) with Gateways 10.0.2.1 & Router plugged into this port is configured with IP 10.0.2.1
I can get access from my LAN to both these routers interfaces and internet works great.
Problem is this: Both 10.0.1.1 and 10.0.2.1 are also Wi-Fi Routers with DHCP disabled. I was simply expecting to somehow route back to my LAN while connected through Wi-Fi to one of these routers but it does not. While Connecting via wireless to 10.0.1.1 I cant access 10.0.2.1 even if i change the IP of the 10.0.2.1 to 10.0.1.2 (to same subnet). Although this may seem logical to you, to me its a mystery. So basically, I just want to use those 2 WAN routers as Wi-Fi routers too and be able to access my LAN. With DHCP disabled, I cant access anything. When I enable DHCP on lets say 10.0.1.1 with DHCP range 10.0.1.50 to 10.0.1.100 then I am able to get internet but no LAN access. And I am sure to the knowledgeable guy out there this also seems logical.
How do I make my Wi-Fi routers plugged into the WAN ports of TL-R470T+ still access the LAN?
