My MacBook Air doesn't have an Ethernet port so I can't plug directly into the cable coming out of the POE which is why I run the cable to the AirPort Time Capsule. I don't get an option in Settings > Network to add an Ethernet connection (DHCP with manual settings) to input 192.168.0.10 so I can get into the PHAROS panel. What is wrong with my CPE210 > POE > Time Capsule > MacBook Air configuration or are other ways to connect to 192.168.0.10? Thanks!

Why not buy an USB to Ethernet adapter for your MacBook Air?:o

My daughter has a Mac like yours, I bought for her this one http://www.manhattan-products.com/adaptateur-usb-30-superspeed-vers-gigabit-ethernet its USB 3.0
You will need it, PHAROS Control its a tool to administrate 210, not for initial set up, the login address is 192.168.0.254 log & pass admin, once you have the USB to ethernet adapter set static ip 192.168.0.10

danymarc, I'm very confused. What do you mean when you say "...the input of the ip is in Pharos Control. Client not on the Mac." I was told in this thread What equipment is needed to receive a wifi signal in an RV that my Mac will be in client mode. Am I maybe following the wrong installation instructions and that's why I can't get into 192.168.0.10? Thank you.

I erased 2 of my posts, by your thread title I was mislead and confused, I was answered base on PHAROS Control administration software, my bad.

Please answer this question, are you able to log in, to configure 210?
If not, you need to buy the USB to ethernet adapter suggested by @winstar

No, I am not able to get into 192.168.0.10. I will buy a USB to ethernet adapter today and try to get into 192.168.0.10. Thanks so very much!

Ok buy whatever USB to Ethernet you find just make sure it supports Mac drivers. the model I posted does
Once you have it, set static ip on USB to Ethernet adapter to static ip 192.168.0.10 or whatever number you like between 1 and 253 now open your browser and type 192.168.0.254 or http://192.168.0.254 after aprox 30 seconds PHAROS web interface will prompt to type log & pass its admin for both, set Test Mode on country and will open another page where you have to change password you can use same or dif.

I am still having problems trying to connect to 192.168.0.254

My setup:
USB to Ethernet adapter from MacBook Air to AirPort Time Capsule
Ethernet from AirPort Time Capsule to PoE adapter LAN port
Ethernet from CPE210 LAN0 port to PoE adapter POE port

Static IP setting: Using DHCP with manual address 192.168.0.10

I'm trying to get to 192.168.0.254 with no success. I've tried using both Firefox and Safari. I've tried with my regular WiFi turned both on and off.

With my home Wifi on, the error message is the server at 192.168.0.254 is taking too long to respond / isn't responding

With my home WiFi off, the error message is I'm not connected to the internet

I cannot get into Pharos Web Management Setup

Can you tell me what am I doing wrong please?

Thank you very much.

3Griffs wrote

USB to Ethernet adapter from MacBook Air to AirPort Time Capsule

you started the thread on 09-09-2015 14:25 today you still can log on 11-13-2015 18:48 WOW
why do you involve AirPort Time Capsule, to log you only need MacBook, USB to Ethernet adapter and CPE

The AirPort Time Capsule is my wireless router and backup system. Before I purchased the CPE210 I was told this was an acceptable way to connect: What equipment is needed to receive a wifi signal in an RV Is this incorrect?

Edit: I was in hospital for 6 weeks is why it has taken me so long to get this to work.