WA5210G connecting two houses HELP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.WA5210G connecting two houses HELP
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
2015-07-20 15:21:29
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
WA5210G connecting two houses HELP
2015-07-20 15:21:29
Tags:
Region : UnitedStates
Model : TL-WA5210G
Hardware Version : V2
Firmware Version :
ISP :
I have an odd ball question that I'm sure someone in this forum can answer.
I'm not a techie, so bare with me as I explain.
I"m sharing a wifi connection with my sister. I have the WA5210G set up as a repeater in my house, picking up her signal.
Nothing is hardwired into my 5210G, it's all wireless.
No issues on the connection as it has be working without a hitch, but here's my issue:
I recently purchased a ROKU and would like to start using it. BUT, ROKU won't connect to the "local network". I found out the router in my sister's house (which I connect to with my WA5210G)
is not set up with WPA or WPA2. The ROKU will not work unless it's WPA or WPA2. If I change the settings on her router, I would have to set up a password. Without getting into details,
she does not want any passwords on her wifi.
So, my question is, can I change the settings on my WA5210G to this WPA or WPA2 without affecting her wifi? (the original source of the internet)
If I can, which mode would I need to the 5210G in to do so?
Can someone give me a non techie explanation of an answer to this?
Model : TL-WA5210G
Hardware Version : V2
Firmware Version :
ISP :
I have an odd ball question that I'm sure someone in this forum can answer.
I'm not a techie, so bare with me as I explain.
I"m sharing a wifi connection with my sister. I have the WA5210G set up as a repeater in my house, picking up her signal.
Nothing is hardwired into my 5210G, it's all wireless.
No issues on the connection as it has be working without a hitch, but here's my issue:
I recently purchased a ROKU and would like to start using it. BUT, ROKU won't connect to the "local network". I found out the router in my sister's house (which I connect to with my WA5210G)
is not set up with WPA or WPA2. The ROKU will not work unless it's WPA or WPA2. If I change the settings on her router, I would have to set up a password. Without getting into details,
she does not want any passwords on her wifi.
So, my question is, can I change the settings on my WA5210G to this WPA or WPA2 without affecting her wifi? (the original source of the internet)
If I can, which mode would I need to the 5210G in to do so?
Can someone give me a non techie explanation of an answer to this?
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
25 Reply
Posts: 981
Helpful: 10
Solutions: 0
Stories: 0
Registered: 2013-01-07
Re:WA5210G connecting two houses HELP
2015-07-23 10:11:11
Yes, there might be settings you will have to change in case it does not provide wifi
I won't help with the Linksys detail how tos, in case you have issues, we are in Tp-Link forum
I can only help you with this.
If it works, you are set.
If it does not work, read all the Thread again I remember I posted lots of info. change subnet on the ip to e.g. 5 and that will do
The right way is to disable dhcp and set same subnet, dif. IP as 5210, connect Lan cable to any of the 4 empty ethernet ports, you end up with a AP, but that will mean login into the router, setting static ip on computer, so let's not go that road.
I won't help with the Linksys detail how tos, in case you have issues, we are in Tp-Link forum
I can only help you with this.
If it works, you are set.
If it does not work, read all the Thread again I remember I posted lots of info. change subnet on the ip to e.g. 5 and that will do
The right way is to disable dhcp and set same subnet, dif. IP as 5210, connect Lan cable to any of the 4 empty ethernet ports, you end up with a AP, but that will mean login into the router, setting static ip on computer, so let's not go that road.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#22
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
Re:WA5210G connecting two houses HELP
2015-07-23 12:32:09
Cool!
So I DO NOT change settings on the 5210g to Access Point? Just leave it alone and plug the wrt54g in, right?
Thanks! It may be a while before I get back to you. Thanks for all your help!
So I DO NOT change settings on the 5210g to Access Point? Just leave it alone and plug the wrt54g in, right?
Thanks! It may be a while before I get back to you. Thanks for all your help!
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#23
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
Re:WA5210G connecting two houses HELP
2015-07-23 16:11:57
HARK! I think I may understand this! (either that or I'm just sleepy as heck!)
My 5210g acts like a modem, right? Doesn't a modem get it's internet from an ISP?
So, if my sister is my ISP, then my 5210g is my modem, correct?
Then, just like any other modem, I can hard wire my wireless router (my wrt54g) to it and I wouldn't have to change any settings on the 5210g, just leave it alone. I may (or may not) have to change settings on the 54g, but we'll cross that later)
So, if I'm right with my thinking, I can also purchase a TP-LINK TL-PA4010KIT AV500, connect of to the 5210, connect the other to the 54g in a more convenient location within my house, and I still should have wifi coverage.
Am I looking at this all wrong? If so, just say the word and I'll delete the entry so no one gets confused. (at least no more confused than I am! LOL)
My 5210g acts like a modem, right? Doesn't a modem get it's internet from an ISP?
So, if my sister is my ISP, then my 5210g is my modem, correct?
Then, just like any other modem, I can hard wire my wireless router (my wrt54g) to it and I wouldn't have to change any settings on the 5210g, just leave it alone. I may (or may not) have to change settings on the 54g, but we'll cross that later)
So, if I'm right with my thinking, I can also purchase a TP-LINK TL-PA4010KIT AV500, connect of to the 5210, connect the other to the 54g in a more convenient location within my house, and I still should have wifi coverage.
Am I looking at this all wrong? If so, just say the word and I'll delete the entry so no one gets confused. (at least no more confused than I am! LOL)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#24
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 981
Helpful: 10
Solutions: 0
Stories: 0
Registered: 2013-01-07
Re:WA5210G connecting two houses HELP
2015-07-23 17:10:52
If your home is as big as Playboy Mansion, yes, but if you live in US, like your avatar says, a great percent of homes construction is wood, WRT54 will do the job.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#25
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
Re:WA5210G connecting two houses HELP
2015-07-24 08:17:04
So....the answer to my "Hark" post is YES?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#26
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
2015-07-20 15:21:29
Posts: 18
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-04-14
Information
Helpful: 0
Views: 3746
Replies: 25
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message