Network cable unplugged Cannot talk to unit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Network cable unplugged Cannot talk to unit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Network cable unplugged Cannot talk to unit
Network cable unplugged Cannot talk to unit
2015-05-07 22:27:58
Region : Argentina

Model : TL-WA5210G

Hardware Version : V2

Firmware Version :

ISP :


Hi there

My computer adapter displays: "Network cable unplugged" then "Identifying" then "Unidentified network" and
repeats it over and over again.

Some times after a hard reset I can access the AP again to reconfigure it and as soon as I restart I get the same.

I used it in "client" mode for about a month. Some evenings it would do it for an hour then OK again. I thought there
might have been interference on the WiFi.

Two days ago I wanted to change the mode to: repeater, and from there onward I kept on having problems.

I upgraded the firmware to the latest version too.
When I first got the AP, it had difficulty to scan for SSID's.

Thanks
  0      
  0      
#1
Options
4 Reply
Re:Network cable unplugged Cannot talk to unit
2015-05-08 09:59:49
You posted Version 2 and that you upgraded to latest firmware, V2 those not have any other firmware but one.
  0  
  0  
#2
Options
Re:Network cable unplugged Cannot talk to unit
2015-05-08 10:07:50
Have you tried a differnet ethernet cable to connect your computer and WA5210G?
  0  
  0  
#3
Options
Re:Network cable unplugged Cannot talk to unit
2015-05-09 19:59:13
Swapping the cable worked. Thanks
Connecting as "client" works well. Repeater mode have problems obtaining ip address.
  0  
  0  
#4
Options
Re:Network cable unplugged Cannot talk to unit
2015-05-11 09:30:52
Try universal repeater instead of repeater.
  0  
  0  
#5
Options