Bug - Editing an IP group used in a switch ACL will fail with "some switches didnt respond"
Bug - Editing an IP group used in a switch ACL will fail with "some switches didnt respond"
When there is an omada adopted Easy-Managed switch (eg, ES205G) anywhere on the network, you cannot edit an IP group used in any switch ACL without first disabling that ACL, and re-enabling it after editing the IP group as desired. Error message "Some switches did not respond" will be displayed and changes to the ip-group not saved otherwise.
The controller should not be trying to push ACLs to switches that are not capable of them
Without an ES switch on the network, you can freely edit an IP Group used in a switch rule while the rule is still active, without error.
Same issue with editing IP-Port groups too.
OC 300
5.15.20.38
Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6
Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2
VPN Server: ER7206 v2
Controller: OC300
