How to enable VLAN split with access point
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to enable VLAN split with access point
Region : UnitedStates
Model : TL-SG1016DE
Hardware Version : V1
Firmware Version : 1.1.2 BUILD 20141017 REL. 50749
ISP : N/A
Model number is really TL-SG108E but it wasn't in the drop down...
Port 1 is connected to a firewall
Port 2 is connected to a DVR camera system
Port 3 is connected to a DVR camera system
Port 4 is connected to a EnGenius EAP350 Access Point
Port 5 is connected to a EnGenius EAP350 Access Point
other ports not connected
Ports 4, 5 are used for employee and guest WiF - the AP has multiple SSIDs and I can set the various SSIDs to different VLANs. Guest VLAN is on SSID 2. How do I tell the switch that ports 4 and 5 are both VLAN 1 and VLAN 2?
Thanks
Model : TL-SG1016DE
Hardware Version : V1
Firmware Version : 1.1.2 BUILD 20141017 REL. 50749
ISP : N/A
Model number is really TL-SG108E but it wasn't in the drop down...
Port 1 is connected to a firewall
Port 2 is connected to a DVR camera system
Port 3 is connected to a DVR camera system
Port 4 is connected to a EnGenius EAP350 Access Point
Port 5 is connected to a EnGenius EAP350 Access Point
other ports not connected
Ports 4, 5 are used for employee and guest WiF - the AP has multiple SSIDs and I can set the various SSIDs to different VLANs. Guest VLAN is on SSID 2. How do I tell the switch that ports 4 and 5 are both VLAN 1 and VLAN 2?
Thanks
No Luck
Thank you for your help but I'm still not getting it to function.
Within the TP-Link Easy Smart Configuration Utility I navigate to VLAN >> 802.1Q VLAN set the Global Config status to Enable.
VLAN (1-4094): 2
VLAN Name: Open
Tagged Ports: 4, 5
Untagged Ports:
Apply
Save (top)
VLA
I don't do anything within 802.1Q PVID Setting.
What am i missing?
Within the TP-Link Easy Smart Configuration Utility I navigate to VLAN >> 802.1Q VLAN set the Global Config status to Enable.
VLAN (1-4094): 2
VLAN Name: Open
Tagged Ports: 4, 5
Untagged Ports:
Apply
Save (top)
VLA
I don't do anything within 802.1Q PVID Setting.
What am i missing?
