Business Community > Routers > VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
< Routers

VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
2015-04-09 06:14:47 - last edited 2021-08-21 05:09:49
Region : UnitedStates

Model : TL-ER604W

Hardware Version : V1

Firmware Version : 1.1.0 Build 20141031 Rel.32628s

ISP : TWC

I have 2 sites set up with IPSEC VPN: Site A IP is 192.168.10.X and Site B is 192.168.20.X - I have Site A router set up to accept VPN IPSEC remote Clients as well. I would like to be able to remotely connect to site A via VPN and also access Site B resources. I am currently using Shrew VPN client software. Any advice on how to accomplish this (if possible) would be greatly appreciated
  0      
 
  0      
 
#1
Options
3 Reply
Re:VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
2015-08-01 06:02:22 - last edited 2021-08-21 05:09:49
I am also interested to solve this problem.
Got 2 sites (192.168.1.0/25; 192.168.2.0/25) interconnected by IPsec VPN. In near future going to add 2 more sites.
One of the site's should accept remote VPN tunnels, L2TP/IPsec was configured as "Client to LAN", IP address pool was defined as a range of the site's LAN subnet - 192.168.1.100-192.168.1.127.
After connection it was possible to ping all the local clients of the site (192.168.1.0/24), but second site (192.168.2.0/25) was unreachable.
Adding addinational routes at Windows doesn't helped. Seems that router isolates remote L2TP clients from IPsec tunnel between sites.
  0  
  0  
#2
Options
Re:VPN Client can't access computers on connected Lan-to-Lan VPN Via IPSEC
2015-08-11 11:54:34 - last edited 2021-08-21 05:09:49
Read tutorial for hub-spoke configuration. Link
  0  
  0  
#3
Options
Read tutorial for hub-spoke configuration. Link
2015-08-14 06:40:29 - last edited 2021-08-21 05:09:49
W
here is this link to read.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1065

Replies: 3

Related Articles
 VPN Client can't access computers on connected Lan-to-Lan VPN
2530 0
TL-ER6020 VPN (ipsec) - can't see all computers in lan
437 0
VPN Client to Lan on multiple subnet
1182 0
Allow access to Omada Controller Management portal from all VPN computers.
640 0
 VPN "lan-to-lan" vs "client-to-lan"
332 1
 Routes to non connected Lan on VPN
419 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.