Business Community > Controllers > Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs
< Controllers

Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs

Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs

Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs
Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs
a week ago - last edited a week ago
Model: OC300  
Hardware Version: V1
Firmware Version: 1.29.5

New Feature - Virtual WANs, on adapted firmware 1.3.0 (ER8411) are not selectable when setting Bandwidth Controls or as the WAN for VPNs (server or client), and cannot be selected in gateway WAN IN acl's

 

They only appear selectable for policy routing.

 

 

Since virtual WANs are effectively an entirely seperate connection (with a seperate public IP) they should be ablke to be set for bandwith, vpn controls and gateway ACLs - otherwise, they seem rather pointless........ ?

 

In particular bandwidth control - if i can set a network policy routed to a virtual wan.....i should be able to enable bandwidth control on that virtual WAN !  Since i can only select the "real" wan, it doesnt work on policy routed networks!

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6 Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2 VPN Server: ER7206 v2 Controller: OC300
  0      
 
  0      
 
#1
Options
2 Reply
Re:Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs
a week ago

Hi @GRL 

Thanks for posting in our business forum.

Either it is not supported at all, or this might need adaptation later on. I assume it is the latter. This feature is only available for pre-release. And the adaptation of the controller is required as well. Gonna be some time before you see a change on the controller and router side.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Bug - Virtual WANs not selectable in Bandwidth Control, VPN server settings, or gateway ACLs
a week ago

  @Clive_A 

 

Hi clive

 

This isnt even pre-release any more

 

Controller 5.15.20.38 is now official, as is the ER7206 v2 firmware 2.2.0.   

 

I have tested this on both the 8411 pre-release firmware, and the 7206 official firmware which are both fully adapted.  Virtual WANs work, but have limited use if they cant be selected in VPNs, Bandwidth Control and ACLs.

 

Perhaps this will come in a future release.

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6 Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2 VPN Server: ER7206 v2 Controller: OC300
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 86

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.