Business Community > Routers > Transfering configuration from Dead router
< Routers

Transfering configuration from Dead router

Transfering configuration from Dead router

Transfering configuration from Dead router
Transfering configuration from Dead router
Yesterday - last edited Yesterday
Tags: #Controller #WAN Setup
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version:

Good Day

 

Sorry for my bad english I am not that great with english

 

So i found my Er605 router no power, so i need to restore the configuration to the new one same model  Er605 unfortunately I don't have the backup of the configuration of the defective Er605, But I do use the Omada controller app is any other way I can restore the configure to the new router? 

 

Thank you for answering my answer

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Transfering configuration from Dead router-Solution
Yesterday - last edited Yesterday

Hi @Daniele0129 

Thanks for posting in our business forum.

Omada app not the Omada Controller app.

Or you mean you have Omada Controller?

If you have Omada Controller, you can remove the old and adopt the new. Then it'll sync the config on this controller right now to the new one.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:Transfering configuration from Dead router-Solution
Yesterday - last edited Yesterday

Hi @Daniele0129 

Thanks for posting in our business forum.

Daniele0129 wrote

  @Clive_A 

 

So all of the configuration will move to the new device?

Only when you are using Controller mode to manage the previous one. Then, yes.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Transfering configuration from Dead router-Solution
Yesterday - last edited Yesterday

Hi @Daniele0129 

Thanks for posting in our business forum.

Omada app not the Omada Controller app.

Or you mean you have Omada Controller?

If you have Omada Controller, you can remove the old and adopt the new. Then it'll sync the config on this controller right now to the new one.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:Transfering configuration from Dead router
Yesterday

  @Clive_A 

 

So all of the configuration will move to the new device?

  0  
  0  
#3
Options
Re:Transfering configuration from Dead router-Solution
Yesterday - last edited Yesterday

Hi @Daniele0129 

Thanks for posting in our business forum.

Daniele0129 wrote

  @Clive_A 

 

So all of the configuration will move to the new device?

Only when you are using Controller mode to manage the previous one. Then, yes.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 44

Replies: 3

Tags

Controller WAN Setup
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.