TL-SG105E DHCP Forwarding issues on latest firmware
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG105E DHCP Forwarding issues on latest firmware
Region : UnitedStates
Model : TL-SG5428
Hardware Version : V1
Firmware Version :
ISP :
I have a Meraki Core switch with a TP-Link TL-SG105E in my office. I have setup VLAN 2 for another device and have a DHCP server on Vlan2.
I set port 1 as a MTU port
I'm running .1Q with ports 1 &5 in VLAN 2
I have setup PVID on port 5 to VLAN 2
Default VLAN 1 is on both sides of VLAN trunk port
DHCP reply is never received on port 5
FROM Meraki Side:
I see vlan trunk enabled, I see two vlans 1 &2, I see my device send a DHCP request on vlan 2
I run a packet capture on the Uplink port to TL-SG105E. It is recieving the DHCP reply from the DHCP server on Vlan 2. reply is never recieved on port 5 of TL-SG105E.
I upgraded to latest firmware.
What am I missing?
Thanks
Brian
Model : TL-SG5428
Hardware Version : V1
Firmware Version :
ISP :
I have a Meraki Core switch with a TP-Link TL-SG105E in my office. I have setup VLAN 2 for another device and have a DHCP server on Vlan2.
I set port 1 as a MTU port
I'm running .1Q with ports 1 &5 in VLAN 2
I have setup PVID on port 5 to VLAN 2
Default VLAN 1 is on both sides of VLAN trunk port
DHCP reply is never received on port 5
FROM Meraki Side:
I see vlan trunk enabled, I see two vlans 1 &2, I see my device send a DHCP request on vlan 2
I run a packet capture on the Uplink port to TL-SG105E. It is recieving the DHCP reply from the DHCP server on Vlan 2. reply is never recieved on port 5 of TL-SG105E.
I upgraded to latest firmware.
What am I missing?
Thanks
Brian