@Vincent-TP  I know how to configure VLANS on my  TL-SG1016PE. What I dont understand is if my AP773 is on Lan1 and I need to pass Vlan information from my omada router how do I set it up to accept various Vlans on a single port on my swtich. All the examples show creating a profile and configuring the swtich within omada. I dont have an omada switch. 

  @johngalt 

Hi,

maybe this could help:

https://www.tp-link.com/en/support/faq/788/
 

Switch to 802.1Q VLAN

i.e.:

For Lan1:

PVID=VLAN1

Untagged=VLAN1

Getting the EAP reachable and default LAN for first SSID.

Create...

VLAN2

VLAN3

and even more VLANs...and set them tagged to Lan1 to support creating additional SSIDs at the EAP.

So with VLAN 802.1Q you will get different tagged network packages serialized at the port (simplyfied figure):

______________________________________________________

.....->| package VLAN3 | package VLAN2 | package VLAN1|......->

------------------------------------------------------------------------------------------