ER7212PC wireless clients shown as wired or not shown at all. Non-default vlan clients not shown
After upgrading to latest firmware all seemed to work ok for a while. I had to reboot the router due to updated SSL certificate and since then clients are not shown properly. Many wireless clients are shown as wired, some are missing completely and clients connected to non-default VLAN are not shown at all.
I have ER7212PC with 5 EAPs connected to it via POE (EAP653 and EAP615-WALL) and a SG2008 switch. I have tried to restart EAPs only and switch only without any change on what's shown on the client list. I also understand that this info is not instant but before the recent restart the information was more or less up to date with reality. It's been a few days now since the restart and no change.
Is there any way to force the update or what sequence of restart should I do to get this at least more or less correct (especially wired/wireless)?