ER8411 v1.0 stops traffic flow to internal networks

ER8411 v1.0 stops traffic flow to internal networks

ER8411 v1.0 stops traffic flow to internal networks
ER8411 v1.0 stops traffic flow to internal networks
Saturday
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.2.3 Build 20241121 Rel.21021

I have two Omada ER8411 v1.0 routers at separate, completely independent locations. Every few days, the router at each site stops forwarding traffic to the internal network. While I can still access the router via WireGuard from outside, I’m unable to reach any resources behind it. This issue occurs at both sites and requires a reboot each time to restore traffic flow. The problem happens randomly every few days.

  0      
  0      
#1
Options
2 Reply
Re:ER8411 v1.0 stops traffic flow to internal networks
Saturday

  @TACPAL 

 

 

Sounds an awful lot like the issue i have posted here, with lots of details and analysis

 

https://community.tp-link.com/en/business/forum/topic/761560

  0  
  0  
#2
Options
Re:ER8411 v1.0 stops traffic flow to internal networks
Tuesday

Hi @TACPAL 

Thanks for posting in our business forum.
More details about the VPN status, the ping you have tried to verify that the peer is okay.

Config screenshot for WG and diagram for the network with IP specified.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#3
Options