antrena setup

antrena setup

antrena setup
antrena setup
Saturday - last edited Monday
Model: CPE210  
Hardware Version:
Firmware Version:

i have free wifi across the road

 

when i connect with my mobile phone i get

 

IP 127.20.10.217

subnet masl 255.255.240.0

router 127.20.o.1

 

how should i setup my antenna to receive better signal....???? client mode i guess..

when i proceed to setup i can see the free wifi and connect but then nothing when i try to connect to internet

 

thanks in advance fro your help

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:antrena setup-Solution
Monday - last edited Monday

Hi  @kostasbmw 

 

Yes, the client mode is for your situation.

 

Is the IP address you got  172.20.x.x? or 127.x.x.x?

 

How did you check the Internet access of the client CPE? Via the management PC?

If you are checking on the same PC, please change the IP settings to DHCP first.

How to Configure the Client Mode on the Pharos device

 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:antrena setup-Solution
Monday - last edited Monday

Hi  @kostasbmw 

 

Yes, the client mode is for your situation.

 

Is the IP address you got  172.20.x.x? or 127.x.x.x?

 

How did you check the Internet access of the client CPE? Via the management PC?

If you are checking on the same PC, please change the IP settings to DHCP first.

How to Configure the Client Mode on the Pharos device

 

Recommended Solution
  0  
  0  
#2
Options
Re:antrena setup
Monday
when I use my phone as a wifi hotspot the antenna receives ok and I have internet when connect to the wifi cross the street I have signal 100% but no internet I don't change anything I use the same setting in client mode
  0  
  0  
#3
Options