Business Community > WiFi > Roaming between EAP772 v1.0 and v2.0
< WiFi

Roaming between EAP772 v1.0 and v2.0

Roaming between EAP772 v1.0 and v2.0

Roaming between EAP772 v1.0 and v2.0
Roaming between EAP772 v1.0 and v2.0
a week ago
Tags: #Roaming
Model: EAP772  
Hardware Version: V1
Firmware Version: 1.0.14

I have three EAP772 units, hardware version: 1 × v1.0, 2 × v2.0.

 

After updating my v2.0 units from firmware 1.0.4 to 1.2.0 via the SDN Controller, roaming between v1.0 and v2.0 stopped working. I have to manually reconnect or move out of range to force a disconnect.

 

Anyone else facing this issue?

 

WLAN Setting

Band: 5GHz, 6GHz

WPA Mode: WPA3-Enterprise

MLO: Disable

Default for the remaining setting

 

Note:

  • Downgrading 1.2.0 back to 1.0.4 restored normal roaming.
  • This issue affects both the 5GHz and 6GHz bands.
  1      
 
  1      
 
#1
Options
4 Reply
Re:Roaming between EAP772 v1.0 and v2.0
a week ago

Hi  @yliu 

 

Is this only happening when roam between v1 and v2?  Will the roam between the two V2 EAP units work? 

 

Will this happen on all kinds of wireless clients?

 

Do you mean the security mode is WPA-Enterprise? Please share with the screenshots of the security mode and WPA mode of  the SSID.

 

You may test if change the security mode to WPA-personal and leave all other options to the default, and see if the issue persists.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:Roaming between EAP772 v1.0 and v2.0
a week ago - last edited Saturday

 Hi @Vincent-TP 

 

Is this only happening when roam between v1 and v2?  Will the roam between the two V2 EAP units work?

Yes, roaming between the two v2 EAP units working as expected.

 

Will this happen on all kinds of wireless clients?

Tested on 2 devices, Samsung Galaxy S23 Ultra (6GHz) and iPad (5th generation) (5GHz) both are getting the similar result.

 

 

Will test with WPA-personal and revert back with the result

  0  
  0  
#3
Options
Re:Roaming between EAP772 v1.0 and v2.0
Friday - last edited Sunday

Hi  @Vincent-TP,

 

The Galaxy S23 Ultra updated this morning and now roams between v1 and v2, but oddly, it switches between 5GHz and 6GHz instead of staying on the same frequency.

The Galaxy S23 Ultra received an update this morning and now attempts to roam between v1 and v2, but it rarely does so properly with WPA-Personal. Only about 1 in 5 times does it actually roam; the rest of the time, it disconnects and reconnects quickly, creating the illusion of roaming.

 

The iPad only roams with WPA-Personal, and no disconnections were observed.

 

On the other hand, the iPad Air 2022 (5th gen) works perfectly with WPA-Enterprise.

 

 

# Update on 30 March 2025:

For Android devices, it seems that this issue specifically affects Samsung devices . It has been confirmed to occur on the Samsung Galaxy S23 Ultra, S22 Ultra, Note 10, and Note 9.

  0  
  0  
#4
Options
Re:Roaming between EAP772 v1.0 and v2.0
Monday

  @yliu 

 

Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID250368860, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#5
Options

Information

Helpful: 1

Views: 173

Replies: 4

Tags

Roaming
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.