Early Access ER8411 V1 1.3.0 Build 20250305 Pre-Release Firmware (Released on Mar 14th, 2025)
Early Access ER8411 V1 1.3.0 Build 20250305 Pre-Release Firmware (Released on Mar 14th, 2025)
This Article Applies to
ER8411(UN) V1
Release Notes
Version Info:
Adapted Model: ER8411(UN) V1
Fully Adapted Controller Version: SDNC 5.15.20.X - Omada SDN Controller_V5.15.20.7 Pre-Release Firmware Windows
Minimum Firmware Version for Update: 1.2.3 Build 20241121 and above.
New Features:
1. Add support to SD-WAN.
2. Add support to Content Filter.
3. Add support to Virtual WAN.
4. Add support to Disable NAT.
5. Add support to Google LDAP.
6. Add support to LAN DNS.
7. Add support to FQDN/Wildcards WAN DHCP Option.
Enhancement:
1. OpenVPN/Wireguard VPN: add support connecting to remote server/peer via domain name.
2. Optimized CPU utilization.
3. Optimized the time to enable the backup link.
4. Optimized booting time.
5. Optimized the time to dial up the WAN link.
6. Optimized the time to upgrade firmware.
7. Optimized the time to generate an OpenVPN profile.
Bug Fixed:
1. Fixed the HTTPS redirection exception in standalone.
2. Fixed the static route for L2TP VPN doesn't take effect after re-enabling L2TP VPN.
3. Fixed the WOL exception when dropping some unknown unicast packets.
4. Fixed the issue that the manual ISP profile for USB modem cannot be saved
5. Fixed the issue that the PPTP VPN would disconnect occasionally.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways
Firmware Download Link
ER8411(UN)_V1_1.3.0_Build20250305
Notes:
(1) The above firmware applies to the described models.
(2) Your device’s configuration won’t be lost after upgrading.
(3) If you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the router upgrade, it's suggested to contact us with the following info:
- Omada Controller version
- Device Firmware version with Build number (previous and current)
If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
How to use the Emergency Mode to recover the firmware for Omada Gateways
Update Log
Mar 14th, 2025:
Release of this post.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
It's SD-WAN that I've been looking forward to the most, so hopefully it will come to the other routers in beta soon.
Too bad you had problems with your upgrade, hopefully a fix will come pretty soon.
- Copy Link
- Report Inappropriate Content
To downgrade to the previous version, you can use the roll-back function from the Router console, SSH into the router and run the roll-back.
- Copy Link
- Report Inappropriate Content
Update my remote site that has very few clients and a handful of PF rules. But they push a ton of bandwidth. Very basic setup. They peak at 2-3GBPS hourly.
I upgraded the 8411 through the controller. I uploaded the new firmware into the firmware section and updated it. So I can roll it back if need be.
No issues so far, with 5.15.20.12 Linux controller.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Wow, that update was absoluty in the right moment. Just bought the ER8411 and was not really happy because the fan was freuqnetly spinning on and noisy. It was the sfp+ module. Since i updated to this firmware no problems. it is quiet and keeps quiet staying about 70 grad celsius. Thank you very much
- Copy Link
- Report Inappropriate Content
Hello,
After upgrade to 1.3.0 my IP TV services stopped working, i have two STB (diff manufacturer) and both couldnt get started.
Had to downgrade to 1.2.3 and all started to work again :(
Please look into it b4 releasing this as stable, since this is crucial service with Omada ecosystem for me.
OC200 ER8411 v1.0
SX3008F v1.20
SG3210X-M2 v1.0
3x SG3210 v3.20
2x EAP773(EU) v1.0
Greets
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 590
Replies: 16
Voters 0
No one has voted for it yet.