Business Community > Switches > The switch port is immediately blocked by Omada Server after connection.
< Switches

The switch port is immediately blocked by Omada Server after connection.

The switch port is immediately blocked by Omada Server after connection.

The switch port is immediately blocked by Omada Server after connection.
The switch port is immediately blocked by Omada Server after connection.
2025-03-11 13:33:20 - last edited 2025-03-12 02:31:17
Model: TL-SG3428X  
Hardware Version:
Firmware Version: current

ich will eine POE Switch an dem  TL-SG3428X anschließen. Dieser wird aber sofort geblockt.

im Omada Protokoll steht  "port .... was blockes"

 

I want to connect a POE switch to the TL-SG3428X. However, this is blocked immediately.

 

the Omada protocol shows ‘port .... was blockes’

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:The switch port is immediately blocked by Omada Server after connection.-Solution
2025-03-12 02:31:11 - last edited 2025-03-12 02:31:30

Hi @IT-DAHER 

Thanks for posting in our business forum.

Use the label and search function on the community, you can find this:

A Port Being Blocked Showing in Controller Log - "xyz's port Gi 1/0/X Was Blocked"

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:The switch port is immediately blocked by Omada Server after connection.-Solution
2025-03-12 02:31:11 - last edited 2025-03-12 02:31:30

Hi @IT-DAHER 

Thanks for posting in our business forum.

Use the label and search function on the community, you can find this:

A Port Being Blocked Showing in Controller Log - "xyz's port Gi 1/0/X Was Blocked"

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced. ● I don't provide ETA for any products/features. No comment.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 74

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.