Map on Controller doesn't show ER605 port numbers
Map on Controller doesn't show ER605 port numbers
hi all,
just wondering why there are no port numbers (except primary WAN port) for the connection with ER605 on the map:
while switch-switch connections are discovered properly:
/BR
ZoloNN
------------------------------------------------------------------------------------
Omada 2x ER605(UN) v2.0 + SG200P(UN) V3.20 + SG2218 V1.20 + 2x SG2008 V4.20 + 3x EAP615-Wall(EU) V1.0
Re:Map on Controller doesn't show ER605 port numbers
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
Re:Map on Controller doesn't show ER605 port numbers
Hi @Clive_A,
yes, LLDP is ebabled in router config
in site settings too
and in EAP config too
despite this, even the EAPs cannot identify their own ports - map says, I'm connected to port 3 of switch - which should be the ETH0....
and just now I've noted, that in controller I can see/configure only three ETH ports (1-3) - ETH0 is missing........
/BR
ZoloNN
------------------------------------------------------------------------------------
Omada 2x ER605(UN) v2.0 + SG200P(UN) V3.20 + SG2218 V1.20 + 2x SG2008 V4.20 + 3x EAP615-Wall(EU) V1.0