Home

Forums

Stories

Knowledge Base

< WiFi

Early Access EAP610-outdoor|EAP610|EAP620 HD|EAP660 HD|EAP623-outdoor HD|EAP625-outdoor|EAP650-Wall|EAP655-Wall

Vincent-TP

3 weeks ago - last edited 3 weeks ago

Posts: 2006

Helpful: 223

Solutions: 781

Stories: 0

Registered: 2024-06-22

3 weeks ago - last edited 3 weeks ago

This Article Applies to:

EAP610 V1, EAP610 V2 Fully Adapted to Omada SDN Controller v5.15 or above;

EAP610-outdoor V1 Fully Adapted to Omada SDN Controller v5.15 or above;

EAP620 HD V2, EAP620 HD V3 Fully Adapted to Omada SDN Controller v5.15 or above;

EAP660 HD V1, EAP660 HD V2 Fully Adapted to Omada SDN Controller v5.15 or above;

EAP623-outdoor HD V1 Fully Adapted to Omada SDN Controller v5.15 or above;

EAP625-outdoor HD V1 Fully Adapted to Omada SDN Controller v5.15 or above;

EAP650-Wall V1, Fully Adapted to Omada SDN Controller v5.15 or above;

EAP655-Wall V1, Fully Adapted to Omada SDN Controller v5.15 or above;

Note

To update to this pre-release version, please make sure your device version is not lower than the version listed below:

EAP610_outdoor 1.0： 1.3.1 Build 20240828 Rel. 83596

EAP610 1.0：1.3.0 Build 20240828 Rel. 82154

EAP610 2.0：1.3.1 Build 20240828 Rel. 83546

EAP620HD 2.0：1.3.0 Build 20240828 Rel. 83863

EAP620HD 3.0：1.3.1 Build 20240828 Rel. 82224

EAP623_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649

EAP625_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649

EAP660HD 1.0：1.3.2 Build 20240828 Rel. 82109

EAP660HD 2.0：1.2.0 Build 20240828 Rel. 85483

No limit for EAP650-Wall v1 and EAP655-Wall v1

Release Notes

1. Added support for Radius logout and CHAP encryption in Standalone mode.

2. Added support for portal landing page selection in Standalone mode.

3. Added support for wired client traffic reporting of accelerated models.

4. Added support for modifying the Inform URL in SSH.

5. Modified the default list of NTP Servers.

6. Optimized the AP portal function.

7. Optimized the management VLAN : only untagged and vlan1 address management packets can pass through when set to default.

8. Optimized the configuration logic and improved the configuration efficiency.

9. Upgraded the OpenSSL library version to 1.1.1n.

10. Added the EAP power information to LLDP messages.

11. Updated the Uboot function.

12. Resolved the issue of high air interface occupancy rate in large-scale deployment scenarios.

13. Resolved the issue that modifying the PPSK without radius profile affected other SSIDs.

14. Resolved the random restart problem of EAP620 HDv3.

Firmware Download

Before the Upgrade

1. Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

2. Please ensure that you know which version (EU/US/CA/JP/EG) you shall use on your Omada EAP devices before you download the following EAP firmware.

Firmware Download Link

Direct Download

EAP610_outdoor v1.0 _1.4.1 (Pre-release Version)

EAP610 v1.0_1.4.1 (Pre-release Version)

EAP610 v2.0_1.4.1 (Pre-release Version)

EAP620HD v2.0_1.4.1 (Pre-release Version)

EAP620HD v3.0_1.4.1 (Pre-release Version)

EAP623_outdoor HD v1.0_1.4.1 (Pre-release Version)

EAP625_outdoor HD v1.0_1.4.1 (Pre-release Version)

EAP660HD v1.0_1.4.1 (Pre-release Version)

EAP660HD v2.0_1.4.1 (Pre-release Version)

EAP650-Wall v1.0 _1.3.1 (Pre-release Version)

EAP655-Wall v1.0_1.4.1 (Pre-release Version)

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v5.15 and above

Update Log

Mar 6th, 2025

Provide the following controller firmware for early access.

EAP610_outdoor v1.0 _1.4.1 (Pre-release Version)

EAP610 v1.0_1.4.1 (Pre-release Version)

EAP610 v2.0_1.4.1 (Pre-release Version)

EAP620HD v2.0_1.4.1 (Pre-release Version)

EAP620HD v3.0_1.4.1 (Pre-release Version)

EAP623_outdoor HD v1.0_1.4.1 (Pre-release Version)

EAP625_outdoor HD v1.0_1.4.1 (Pre-release Version)

EAP660HD v1.0_1.4.1 (Pre-release Version)

EAP660HD v2.0_1.4.1 (Pre-release Version)

EAP650-Wall v1.0 _1.3.1 (Pre-release Version)

EAP655-Wall v1.0_1.4.1 (Pre-release Version)

Recommended Threads

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Wish you a happy life and smooth network usage! >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

15 Reply

IamMurphy

LV2

2 weeks ago - last edited 2 weeks ago

Posts: 27

Helpful: 19

Solutions: 0

Stories: 0

Registered: 2023-03-22

2 weeks ago - last edited 2 weeks ago

@Vincent-TP

v1 of the 660HD is getting some love does that mean the 690E HD are going to receive some love or still lovely EOL paperweights....

b101

LV1

2 weeks ago - last edited 2 weeks ago

Posts: 13

Helpful: 9

Solutions: 0

Stories: 0

Registered: 2024-02-16

2 weeks ago - last edited 2 weeks ago

@Vincent-TP

dononeil

LV2

2 weeks ago - last edited 2 weeks ago

Posts: 50

Helpful: 14

Solutions: 1

Stories: 0

Registered: 2022-10-28

2 weeks ago - last edited 2 weeks ago

@Vincent-TP

I've installed this on my 3 EAP610-Outdoor v1's, and 2 of the 3 are randomly rebooting, causing downstream mesh connections to go down. I have this same problem on the previous beta (1.40).

Any ideas why there is a random reboot? Both of the 2 that are rebooting are connected via ethernet to the official power supply, and to a UPS. They both have 1 downstream mesh connection (one has another EAP610-Outdoor, the other an EAP225-Outdoor).

papac0rn

LV2

2 weeks ago - last edited 2 weeks ago

Posts: 20

Helpful: 9

Solutions: 1

Stories: 0

Registered: 2022-11-18

2 weeks ago - last edited 2 weeks ago

Hi @dononeil

I worked with support and they provided a new version 1.4.93 for my 610 outdoor v1 for testing that resolved the random reboots. You may want to put a ticket in.

Hope this helps.

dononeil

LV2

2 weeks ago

Posts: 50

Helpful: 14

Solutions: 1

Stories: 0

Registered: 2022-10-28

2 weeks ago

@papac0rn Thanks... any other issues with that version of the firmware I should be aware of? This stability issue is driving me nuts!

papac0rn

LV2

2 weeks ago

Posts: 20

Helpful: 9

Solutions: 1

Stories: 0

Registered: 2022-11-18

2 weeks ago

@dononeil

Everything seems fine now. No reboots since upgrading. Candy in support helped me with this issue.

RickRick123

LV1

2 weeks ago

Posts: 14

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2025-01-15

2 weeks ago

@papac0rn

Hopefully what they identified they apply to the EAP610v3 with 1.5.0 firmware. Maybe that same logic in the device you have is causing my random reboots.

dononeil

LV2

2 weeks ago

Posts: 50

Helpful: 14

Solutions: 1

Stories: 0

Registered: 2022-10-28

2 weeks ago

@papac0rn They sent me the new firmware and it hasn't resolved the issue unfortuately. I have 2 separate ethernet connected EAP610's that act as mesh roots. The mesh connection between one of the EAP610's and a mesh connected EAP610 is not stable, it has rebooted 2x on me in the last 24 hours. It's less than it was before, but it's still happening. There must still be some slow memory leak or something. The link between the other EAP610 and an EAP225 hasn't rebooted yet, but it's only been 24 hours, so who knows if it will happen.

It's really frustrating to try to use an official feature (mesh) that simply doesn't stay stable. I have several other AP's downstream of the 610's that get disconnected when the mesh conneciton goes offline due to the reboot. I even tried rolling back to the last 4 firmware versions (beta and official) and they all had the same problem.

papac0rn

LV2

2 weeks ago

Posts: 20

Helpful: 9

Solutions: 1

Stories: 0

Registered: 2022-11-18

2 weeks ago

@dononeil

On 1.4.93 I'm at 12 days without a reboot. I have a single 610outdoor v1 doing mesh to eap683lr. Maybe it's something in the mesh causing your reboots. If you cant tolerate the reboots stable code I think 1.3.1 worked great. This is for my home so I kinda tinker. Good luck though.

#10

dononeil

LV2

2 weeks ago - last edited 2 weeks ago

Posts: 50

Helpful: 14

Solutions: 1

Stories: 0

Registered: 2022-10-28

2 weeks ago - last edited 2 weeks ago

@papac0rn I've tested 1.3.0, 1.3.1, 1.4.0, 1.4.1 and now 1.4.93 and they all have the reboot issue (some worse than others). I've had 3 reboots on 1.4.93 in less than 24 hours. I've sent logs and information to the tech support people so they can see the problem. Hopefully they can find the bug quickly.

#11

Early Access EAP610-outdoor|EAP610|EAP620 HD|EAP660 HD|EAP623-outdoor HD|EAP625-outdoor|EAP650-Wall|EAP655-Wall

Early Access EAP610-outdoor|EAP610|EAP620 HD|EAP660 HD|EAP623-outdoor HD|EAP625-outdoor|EAP650-Wall|EAP655-Wall

This Article Applies to:

Note

Release Notes

Firmware Download

Before the Upgrade

Firmware Download Link

Update Log

Mar 6th, 2025

Recommended Threads

Information

Voters 1

Tags