Hello People Much Smarter than Me .

I have an EAP655-Wall connected via ethernet cable to an SG2210P switch that switch is connected to my ISP's router. I have created a DHCP scope and vlan on the switch and tagged the vlan to the switch port that the EAP is connected to.

On the EAP I have created an SSID with matching vlan and additional added that vlan to one of the ethernet ports on the EAP, however I cannot get internet access from the SSID , although I can get a DHCP lease for any device that is connecting to the SSID or ethernet port.

So I am not sure if its just a routing issue or I am missing some additional configuration ?.

The details are (not real ip addresses)

Base network from ISP router = 192.168.1.0/24

SG2210P switch ip address = 192.168.1.4

EAP ip address = 192.168.1.5

dhcp scope on switch  = 192.168.10.0/24

vlan on switch = vlan 10  - interface ip address = 192.168.10.1

interface on switch  = untagged vlan 1, tagged = vlan 10

SSID on EAP is set to vlan 10

From my pc (192.168.1.x address) I can ping the vlan 10 gateway of 192.168.10.1 but not any dhcp addresses in 192.168.10.x

From a pc on vlan 10 (192.168.10.x address) I can ping anything in the 192.168.1.0x network, I cannot ping or access the internet (ping 8.8.8.8 fails for example)

Hopefully someone can help ?