Business Community > Routers > Problem with adapting ER605 v2.20 with the controller after changing the IP
< Routers

Problem with adapting ER605 v2.20 with the controller after changing the IP

Problem with adapting ER605 v2.20 with the controller after changing the IP

Problem with adapting ER605 v2.20 with the controller after changing the IP
Problem with adapting ER605 v2.20 with the controller after changing the IP
Thursday - last edited Friday
Tags: #Controller
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6
Hello.
I have a connected ER605 v2.20 router with the Omad controller in the latest beta version (I also checked other versions) placed on Docker with standard settings, everything works without a problem, but after changing the default IP from 192.168.
I have several networks set up on Docker and only this one has a problem after changing the IP. Is it a software error?

Please help

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP-Solution
Friday - last edited Friday

Hi @djwujek 

Thanks for posting in our business forum.

When you change the IP, you need to refresh the IP of the controller.

If you don't replug the cable, it will keep using the old DHCP IP.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP-Solution
Friday - last edited Friday

Hi @djwujek 

Thanks for posting in our business forum.

When you change the IP, you need to refresh the IP of the controller.

If you don't replug the cable, it will keep using the old DHCP IP.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP
Friday
This was done, I even restarted the controller with no results, it still does not connect to the controller.
  0  
  0  
#3
Options
Re:Problem with adapting ER605 v2.20 with the controller after changing the IP
Friday

  @djwujek 

 

The router changes its IP address. After restarting, the controller joins the correct (changed subnet) and has the appropriate ports open, but the router no longer connects to the controller.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 77

Replies: 3

Tags

Controller
Related Articles
Er605 V2.20 and Er605 V2.0 Firmware
3140 0
The issues of ER605 V2.20 before joining to Omada Cloud Essentials and after joined
371 0
Gaming Network Reaction Prio QOS ER605 v2.20 + SG2008P v3.20 + OC200
109 0
ER605 Access Control help
196 0
My ER605 router stuck in preconfigured
526 0
undetectable er605 on omada oc200
228 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.