Port forwarding / WAN IP not shwoing in list/overview
I am currently trying to configure a gateway. The WAN connection has a 28 subnet with 14 usable IPs. I can configure portforwarding for them under "Transmission" / "NAT". But in the overview of all defined port forwarding rules, the assigned WAN IP is not listed. This is kind of cumbersome when having a lot of WAN IPs. You never know which IPs are already in use for which port. Except you open each rule separatly.
=> PLEASE add the assigned WAN IP to the overview.
BR
C
Hi @Honkman
Are you referring to this info? You should first choose the connected WAN port, and the IP address on this page is the WAN IP.
In the following picture, 192.168.1.105 is the WAN IP of WAN2.
Hi @Honkman
Are you referring to this info? You should first choose the connected WAN port, and the IP address on this page is the WAN IP.
In the following picture, 192.168.1.105 is the WAN IP of WAN2.
@Vincent-TP No. I am taking about this listing:
As our (single) WAN connection is a 28 subnet we have 14 alias IP addresses that we can use/assign. But I just see "WAN2". Period. No information about the assigned alias IP for that rule.
BR
C