Hi  @NickPlymouth 

Thanks for reaching out with your question. Using CPE210s is indeed a popular and effective way to connect two buildings wirelessly, especially when running a physical cable isn't feasible. Given the relatively short distance of about 50 meters, this solution can work quite well. However, there are a few considerations and alternatives you might want to explore:

Using CPE210s

• Pros:

  • Range: 50 meters is well within the operational range of CPE210s.

  • Ease of Setup: They are relatively straightforward to configure and can provide a stable connection.

  • Cost-Effective: CPE210s are generally affordable and widely available.

• Cons:

  • Outdoor Installation: Ideally, they should be placed outside to ensure a clear line of sight and optimal signal strength. However, if you prefer to keep everything indoors, you might still achieve a good connection, but it could be less reliable.

Alternative Solutions

1. Mesh Wi-Fi Systems:

   • Pros: Some advanced mesh Wi-Fi systems can bridge between buildings. They are designed for indoor use and can provide seamless Wi-Fi coverage.

   • Cons: They might not be as powerful as dedicated outdoor units like the CPE210s, especially over longer distances or through obstacles.

2. Powerline Adapters:

   • Pros: These can extend your network using the existing electrical wiring in your buildings. They are easy to set up and don’t require outdoor installation.

   • Cons: Performance can vary based on the quality of your electrical wiring and the presence of other electrical devices.

3. Wi-Fi Repeaters/Extenders:

   • Pros: These can be placed indoors and can help extend the Wi-Fi signal from one building to another.

   • Cons: They might not provide the same level of stability and speed as a dedicated point-to-point solution like the CPE210s.

Recommendations

• Line of Sight: Ensure that there is a clear line of sight between the two buildings. This will significantly improve the reliability and speed of the wireless connection.

• Indoor Placement: If you prefer to keep everything indoors, test the signal strength in different locations to find the best spot for the CPE210s.

If you are seeking more advanced products, you may consider EAP215-bridge KIT.