ER706W WLAN ACLs (or lack of)
Since I Have to buy the router to discover that lan-lan ACLs not available on gateway. How can one go about doing ACLs for specific port or ip for vlans attached to SSIDs ?
Right now my "enterrprise grade" router has an AX3000 WLAN on it that I cannot use with VLANs since I can't do any ACLs worth a fudge. And to make this sound more funny, If I go and shell out for an EAP, and ACL it properly, how will I use roaming with the WLAN on the router? Someone please shed some light on this.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Pink_Waters
Thanks for posting in our business forum.
Controller mode? ACL with Port is not available. It has been submitted to the team.
- Copy Link
- Report Inappropriate Content
Hi @Pink_Waters
Thanks for posting in our business forum.
Controller mode? ACL with Port is not available. It has been submitted to the team.
- Copy Link
- Report Inappropriate Content
@Pink_Waters Yes, Controller mode.
I had to improvise and turn my server interface bridge to "lan aware", then created a tagged bridge from the same interface. now the server is sitting across 2 vlans one for the SSID and one for the LAN. then went ahead and used the gateway acls to restrict the SSID, and then used the switch acls to firewall the vlan interface with lan-lan. Hope that helps someone untill we get a the lan-lan feature added.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 72
Replies: 2
Voters 0
No one has voted for it yet.