Mesh Interference
My system is based on one ER706W and two EAP650 outdoor (1.2.0) devices, managed by Omada controller linux version 5.15.6.7. All devices with the latest firmware. The ER706W with one of the EAP 650 wireless connected works great without any problem in MESH. The scond EAP650 gives me a real problem. First of all it will not adopt wireless while it is in a reasonable distance. During adoption it ask which it should join, the EW or the 650, signal is aprox -60dB. After a while it faiils repeataly with both. At least i tried a wired connection and it works but the 5G gives me problems.. The other both devices working 5G channel 40 and are both 2-3% utilized. The problem 6and outsite 50 is alway on another channel like 32 and report an interference of 60 - 70 %. No devices are able to connect 5G to these EAP650. All devices are in a triangle with a distance of 40 feet. We are living rural on a certain distance of our neigbours and sometimes is see only a weak 2.4G signal. There are no airports or military eqipment in the neighbourhood and no other microwaves of other things arround. I have renewed the firmware of the EAP650 conform the procedure and is not a solution. Please help.