@Clive_A 

 

thanks for your reply I found already this doc and tried to follow it even i don't have only the oc200, the switch and some EAP but not a gateway.

i also found in one doc what default vlan 1 can't be change... but i think this is the think i need to do... i'm verry confused by this... i thought i understand vlans but this make me feel i didnt unterstand it even partialy :(

  @ASD_AuZ the gateway is not needed.  There are two basic config items to make it work.  One is the PVID needs to be set to your management VLAN on the port that connects to your oc200 (set in the Port Profile).  The second is that the management VLAN interface needs to exist on the switch with the Management VLAN option enabled (set in the switch's VLAN intrface config).  After you confirm that you can access it via the management VLAN the default VLAN interface on the switch can be disabled.  The configuration article shows this although the screen shots looked a little dated.

 

  @D-C 

Hi,

thanks for your reply
I maybe did it not the correct way but i got it working by changing the vlan ID of the "default" vlan to 144

The correct way is the way that works. Just be aware that devices connected to the "default" VLAN will now be on what you consider your management VLAN.