Replace main ISP GPON ONU router with ER707-M2 by using SFP port
Hi
I am going to buy ER707-M2 and i want to remove my old Huawei HG8546M (GPON ONU)
With ER707-M2 by using SFP port please let me know how is it possible and which SFP module I have to by for it
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @ishaq373
Thanks for posting in our business forum.
We have users replacing their ISP-provided modem with an SFP module.
But this depends on your ISP.
You have to address at least two issues at this moment:
1. Specs of the fiber from your ISP.
2. If they require a modem or you are allowed to bypass the modem to make a direct connection.
- Copy Link
- Report Inappropriate Content
I have attached my main ISP router configuration screen shot further my ISP doesn't have any problem for replacing the main router with ER707-M2
So kindly advise me which SFP module is suitable for me as per attached screen shot
Thanks
- Copy Link
- Report Inappropriate Content
Hi @ishaq373
Thanks for posting in our business forum.
ishaq373 wrote
I have attached my main ISP router configuration screen shot further my ISP doesn't have any problem for replacing the main router with ER707-M2
So kindly advise me which SFP module is suitable for me as per attached screen shot
Thanks
This is software. Tells nothing about the fiber you have.
As replied earlier, you should know them from your ISP before you pick a module.
If you have a single-mode fiber, get a single-mode, and choose the proper fiber wavelength.
- Copy Link
- Report Inappropriate Content
I have contacted with my ISP and i observe they doesn't have much knowledge as they conformed that my Huawei HG8546M existing router has been connected with SC UPC singal mode fiber cord so kindly suggest me compatible SFP module.
Further my ISP is ready to replace my existing router with ER707-M2
- Copy Link
- Report Inappropriate Content
Hi @ishaq373
Thanks for posting in our business forum.
ishaq373 wrote
I have contacted with my ISP and i observe they doesn't have much knowledge as they conformed that my Huawei HG8546M existing router has been connected with SC UPC singal mode fiber cord so kindly suggest me compatible SFP module.
Further my ISP is ready to replace my existing router with ER707-M2
Single mode? That's just the interface. I've seen people using this.
You need to know about the module mode.
The module you can choose: https://www.omadanetworks.com/en/business-networking/omada-accessory-module-cable/?filterby=6408
But be sure you know the fiber mode and compare the specs before making a purchase.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @ishaq373
Thanks for posting in our business forum.
ishaq373 wrote
You don't know the fiber mode, what do you want to choose?
You know the mode before you choose the module.
Single mode, pick the single mode module. Do not choose the model number containing A and B because they are used in pairs.
- Copy Link
- Report Inappropriate Content
As per ISP 1G Singal mode
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 117
Replies: 10
Voters 0
No one has voted for it yet.