Business Community > Switches > Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch
< Switches

Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch

Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch

Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch
Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch
2024-12-09 00:20:28 - last edited 2024-12-09 01:56:52

I have a Jetstream 8-Port Gigabit Smart Switch installed but not yet fully configured. This is being controlled by an Omada hardware controller and is connected to a SafeStream Business Gigabit Multi-Wan VPN Router.

 

I find that I need 2 more switch ports but rather than purchase a 10 (or more) port switch, I'd like to simply add a TL-SG105S, 5 Port switch, linked by cable to the exisitng switch.
Will the new 5 port switch act as an extension to the 8 port switch and still be under control of the Omada controller?

Ā  0 Ā  Ā  Ā 
Ā 
Ā  0 Ā  Ā  Ā 
Ā 
#1
Options
1 Accepted Solution
Re:Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch-Solution
2024-12-09 01:56:43 - last edited 2024-12-09 01:56:52

Hi @Wurlitzerwilly 

Thanks for posting in our business forum.

This is an unmanaged switch. Plug-and-play, no control at all.

You can cascade them.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
Ā  1 Ā 
Ā  1 Ā 
#2
Options
4 Reply
Re:Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch-Solution
2024-12-09 01:56:43 - last edited 2024-12-09 01:56:52

Hi @Wurlitzerwilly 

Thanks for posting in our business forum.

This is an unmanaged switch. Plug-and-play, no control at all.

You can cascade them.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
Ā  1 Ā 
Ā  1 Ā 
#2
Options
Re:Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch
2024-12-09 18:23:29

  @Clive_A 

I hope that posting in the Business Forum is correct, as Omada seems to be considered as a business product?

Thanks for your reply.

 

Excuse my ignorance: If I plug the unmanaged switch into a Jetstream port, will it mirror are any settings/restrictions that Omada applies to that Jetstream port?

 

Ā  0 Ā 
Ā  0 Ā 
#3
Options
Re:Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch
2024-12-10 00:48:04

Hi @Wurlitzerwilly 

Thanks for posting in our business forum.

Wurlitzerwilly wrote

  @Clive_A 

I hope that posting in the Business Forum is correct, as Omada seems to be considered as a business product?

Thanks for your reply.

 

Excuse my ignorance: If I plug the unmanaged switch into a Jetstream port, will it mirror are any settings/restrictions that Omada applies to that Jetstream port?

 

It does not process any of the packets coming from the Jestream(smart/managed) switch. Just switch, as if it were increasing the physical interfaces(ports).

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Ā  1 Ā 
Ā  1 Ā 
#4
Options
Re:Adding a TL-SG105S, 5 Port Gigabit Ethernet Network Switch to an existing Omada based switch
2024-12-10 01:44:35
Thanks. I fully understand. I had not previously discovered the Omada 5-Port RJ45 Gigabit Switch - ES205G which does what I want and is Omada compliant, so I've ordered that one instead. In fact the ES205G is a few Ā£ cheaper than the TL-SG105S. šŸ˜€
Ā  0 Ā 
Ā  0 Ā 
#5
Options

Information

Helpful: 0

Views: 339

Replies: 4

Related Articles
TP-Link Litewave 5-Port Gigabit Desktop Switch
650 0
Ā Differences between TL-SG105E and TL-SG105S
20672 0
Ā Difference between TL-SG105S and TL-SG105
28397 0
Ā Details about 5-Port Gigabit Easy Smart Switch TL-SG105E
841 0
Ā TL-SG105s no lights on the network ports
5840 0
Ā Fast Ethernet or Gigabit Ethernet
716 0
About Us
Press
Copyright Ā© TP-Link Systems Inc. All rights reserved.