ER605 slows network speed extreme
Hi
Every few hours the network speeds drops from 1200 / 120 to 80 / 80.
After a reboot the speed comes back up, but after a few hours (approx 2 hrs) the speed drops back to 80 / 80.
Tried a scheduled reboot at 05.00 am.
But at about 08:00 am the speed is down to 80/80 again.
Tried a powerdown at 23:00 pm
in the morning the date and time settngs are back to 2018, and the speed is down at 80/80 again.
I have no idea anymore
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @AJC01
Thanks for posting in our business forum.
Start with your network diagram with IPs marked out.
Second, replace cables. The speed can degrade if the cable is not good. You need to check at least two cables as you connect the router and modem and router and PC. For testing purposes, always recommend 3ft CAT5e.
Is your test based on the wired connection?
- Copy Link
- Report Inappropriate Content
Thank you fot the response
ISPmodem -------- ER605 ------ local network
The speed is tested with a cable.
All Cables are cat 6a, all have been replaced.
- Copy Link
- Report Inappropriate Content
Hi @AJC01
Thanks for posting in our business forum.
AJC01 wrote
Thank you fot the response
ISPmodem -------- ER605 ------ local network
The speed is tested with a cable.
All Cables are cat 6a, all have been replaced.
When the network is slow, is the ping to the external DNS server okay?
Iperf in the LAN, does it behave normally?
Looks like your ISP issue if you are certain these stuff are fine locally. I am still not told about the IP address. I am not sure if you have misconfiguration in your network.
- Copy Link
- Report Inappropriate Content
Hi Thnx fot the reply
ISP ----------------------------------> ------------------ ER605-------------------------------> DHCP ------- LAN
192.168.178.x 192.168.178.y 192.168.168.X
I don't know how to use iperf
- Copy Link
- Report Inappropriate Content
Matters on how big the ISP subnet is... It could be covering your local LAN subnet.
I would change the LAN subnet to something completely opposite. Like a 10.10.10.0/24 or a 172.21.1.0/24
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
AJC01 wrote
Hi Thnx fot the reply
ISP ----------------------------------> ------------------ ER605-------------------------------> DHCP ------- LAN
192.168.178.x 192.168.178.y 192.168.168.X
I don't know how to use iperf
I understand thats the only thing connected to the ISP. But per the IP address scheme... they are really close in range. If the ISP is using a bigger subnet it may cover yours. I would change the subnet. Just for giggles.
- Copy Link
- Report Inappropriate Content
Thank you for the reply.
i am trying to understand.
if the er605 is the only connected device, how can the isp contact or cover the local network ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 148
Replies: 8
Voters 0
No one has voted for it yet.