Home

Forums

Stories

Knowledge Base

Business Community > Controllers > DHCP VLAN Relay Not Giving Correct Scope

< Controllers

DHCP VLAN Relay Not Giving Correct Scope

UMB8998

2024-11-21 03:36:47 - last edited 2024-12-20 09:18:29

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-01-17

DHCP VLAN Relay Not Giving Correct Scope

2024-11-21 03:36:47 - last edited 2024-12-20 09:18:29

Hello,

I have an issue with DHCP Relay for VLANS, basically the DHCP server is giving an IP from the switch vlan scope instead of the other vlan, I have followed this guide: https://www.tp-link.com/us/support/faq/4009/ and I have the switch running with an omada controller.

If I setup an IP for the client vlan on the switch, I have no problem the DHCP server get the request from the switch with the IP of the client VLAN and gives the IP from that scope.

I'm not sure if I'm missing something

P.S. Sorry for my bad english

1 Accepted Solution

Vincent-TP

2024-11-21 09:18:18 - last edited 2024-12-20 09:18:29

Posts: 1624

Helpful: 191

Solutions: 656

Stories: 0

Registered: 2024-06-22

Re:DHCP VLAN Relay Not Giving Correct Scope-Solution

2024-11-21 09:18:18 - last edited 2024-12-20 09:18:29

Hi @UMB8998

To better understand the issue, please let us know the following info:

1. The model number, hardware version, and firmware version of your switch;

2. The type of the controller you are using, the firmware version of the controller;

3. The topology of your network;

4. Some screenshots of the DHCP VLAN Relay configuration.

5. Which IP address are the DHCP clients get?

Wish you a happy life and smooth network usage! >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

Recommended Solution

1 Reply

Vincent-TP

2024-11-21 09:18:18 - last edited 2024-12-20 09:18:29

Posts: 1624

Helpful: 191

Solutions: 656

Stories: 0

Registered: 2024-06-22

Re:DHCP VLAN Relay Not Giving Correct Scope-Solution

2024-11-21 09:18:18 - last edited 2024-12-20 09:18:29

Hi @UMB8998

To better understand the issue, please let us know the following info:

1. The model number, hardware version, and firmware version of your switch;

2. The type of the controller you are using, the firmware version of the controller;

3. The topology of your network;

4. Some screenshots of the DHCP VLAN Relay configuration.

5. Which IP address are the DHCP clients get?

Wish you a happy life and smooth network usage! >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

DHCP VLAN Relay Not Giving Correct Scope

DHCP VLAN Relay Not Giving Correct Scope

Information

Voters 0

Tags