EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??

EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??
EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??
2 weeks ago
Model: EAP225  
Hardware Version: V5
Firmware Version: 1.2.1

I don't run controller software all the time. Once in a blue moon I'll run the software and to my surprise all my EAP225 AP's mostly V5 and one V4 have Tx power set to 24db when I had previously set them all to 11db???

 

Is this something that happens with firmware updates or controller updates?

 

This isn't cool because I don't want to be bbq'd in my home!

 

I haven't found any other references to this problem online.

  0      
  0      
#1
Options
3 Reply
Re:EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??
2 weeks ago

  @westvandude 

 

Hi, did you update the controller or the EAP firmware recently?

You may configure it again, and click apply. After that, you can reboot one EAP, see if it will keep the configuration or not.

  0  
  0  
#2
Options
Re:EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??
2 weeks ago

  @Vincent-TP no updates recently. The V4 is running firmware 5.1.6 and the V5's are running 1.2.1 and controller is 5.13.22  which I should probably upgrade. This is at least second time this has happened.

 

I rebooted one of the V5's and set to "low" which is 9dbm. After reboot of the EAP it is still at 9dbm.

 

Just doing a reboot and getting 5.14.32 latest controller....

 

So far omada has been light years more stable than the ubiquiti garbage I had before.

  0  
  0  
#3
Options
Re:EAP225 V4 and V5 default to maximum 2.4ghz transmit power 24db by themselves??
2 weeks ago

  @westvandude 

 

Thanks for sharing, you may observe for some more time.

You are welcome to post all the time.

  0  
  0  
#4
Options