Early Access Omada SDN Controller_V5.15.6.4 Pre-Release Firmware(Released on Oct 18th, 2024)
This Article Applies to
Omada_SDN_Controller_v5.15.6.4 Windows (Windows 7/8/10/11/Server, 64bit Recommended)
Omada_SDN_Controller_v5.15.6.4_linux_x64.tar
Omada_SDN_Controller_v5.15.6.4_linux_x64.deb
Overview
We hope to offer you a chance to experience the new features added in the Controller v5.15.6.4 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Release Notes
New Features
1. Added support for Gateways: DR3650v, ER703WP-4G-Outdoor.
2. Added support for APs: EAP775-Wall, EAP625GP-Wall, EAP115-Bridge v2.0, EAP211-Bridge v2.0, EAP215-Bridge v2.0.
3. Added support to disable ports in the properties window of device.
4. Added support for batch import and export of Radius users in Site View > Settings > Network > Profile > RADIUS Profile > RADIUS Users.
5. Added support to configure DSL Gateway features in Site View > Settings > Wired&Wireless Networks > WAN Mode:
- Virtual WAN
- VoIP
- DSL Dialing
- TP-link DDNS
Enhancements
1. Optimized NAT Configuration, limit the entries of NAT according to Alias IP.
2. Optimized WLAN Optimization, added support to deploy Channel Width and Channel.
3. Optimized properties window, added support for Loopback Detection in Device > Properties window > Config > Services > Loopback Control.
4. Optimized the following features in Omada App:
- Added support for NTP configuration.
- Added support for Static Routing.
- Optimized properties window of the device
Notes
1. This version of the Controller is fully applied to the Omada APP of version 4.20 or above.
2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
3. Since version 5.14.32.2, Omada Software Controller no longer supports upgrade from Controller v4.
4. Since version 5.14.32.2, Omada Software Controller(windows) only supports installation on Windows64-bit platform.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.
(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.
Firmware Download Link
-
Direct Download
Omada_SDN_Controller_v5.15.6.4_pre-release_windows
Omada_SDN_Controller_v5.15.6.4_pre-release_linux_x64_deb
Omada_SDN_Controller_v5.15.6.4_pre-release_x64_tar.gz
Additional Information
If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:
- Omada Controller version (previous and current)
- Device Model(s), Hardware and Firmware versions
- (if possible) A copy of the Log file and Backup Config file
If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.
>> How to get the Log file and Backup Config file for Omada SDN Controller:
-
If your Windows software controller failed to get launched, please locate the controller installation path for the Log file.
-
If it's not a launch issue, you can export the Log file and Backup Config file in the local network.
-
For Omada Controller v5.8 or later version,
In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.6 or v5.7,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.5 or previous version,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.
-
Recommended Threads
TP-Link Early Access Program Is Now Available!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, unfortunately, no ETA yet.
But we just released the pre-release version for 5.14.
You may have a look:
https://community.tp-link.com/en/business/forum/topic/706294
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I am having the same issues as others. I am running in a docker container managed by portainer on ubuntu 22.04. I cannot click the cloud slider, its stuck on. Once you access a site, you cannot go back to the global setting. It dropped all the SSL certs. I cannot log in with the local account at all, and can only access the local is with my cloud credentials. I tried to roll back, but that took a bad turn, so for now I will just stay on the 5.15.6.4 unti you guys get it fixed. It is functioning somewhat.
- Copy Link
- Report Inappropriate Content
Thank you for your feedback. It's recorded.
- Copy Link
- Report Inappropriate Content
Hi all,
For the cloud access offline issue, here is a temporary solution:
Login the controller locally, disable and re-enable the cloud access button, it will bring the controller back online.
Some people can't do this because they are logged in locally with a cloud account.
For these people, please log out the controller, and log back in with a local account. After this, you will be able to disable and re-enable the cloud access button.
We will fix this issue in the official firmware. For now, please do as I said above. Thank you for your understanding.
- Copy Link
- Report Inappropriate Content
if there have been any recent updates or future plans to add category-wise content filtering capabilities in the Omada Controller, such as blocking specific categories like social media, gaming, and adult content also App.
Like this
- Copy Link
- Report Inappropriate Content
@Vincent-TP I can no longer log into my SDN locally.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for the reply as well as the links to the Hardware controller downloads. Can you let me know which one i am to download.
Thanks Heaps
Eff
- Copy Link
- Report Inappropriate Content
@Vincent-TP Excellent workaround - thank you!!! It worked...you have to login as the LOCAL account that is defined as the "Main Administrator" in order for this workaround to enable Cloud Access. I logged in as the local "main administrator" account directly on the Windows 11 system hosting the Omada Controller and was able to disable/enable Cloud access.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7907
Replies: 72
Voters 1
